Autowatch Ghost Immobiliser Installation

The Ghost is the UK's most advanced aftermarket immobiliser designed for CAN buses. It is discreet, does not use LED indicators or key fobs, and is concealed in the wiring of the vehicle.

It also permits the user to disable the system temporarily by using Transport Mode for when they are renting their vehicle. This guide will guide you through the steps of installing an Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning attacks and relay attacks. The system is connected directly to the ECU of your vehicle and secured by a PIN code that you choose. It is inaccessible to thieves using diagnostic scanners or other modern methods, and is unable to be disabled by circuit cuts.

The system is easy to use, however professional installation is advised to ensure a perfect connection to the ECU of your vehicle. Installers approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the security package for your vehicle.

The first step is to disconnect your battery to prevent the possibility of airbag deployment and short circuits. When the battery is disconnected, the installer can be able to work safely. Basic hand tools can be used for precise connections. A multimeter is useful to test electrical values. Cable ties and insulation tape are also vital for protecting connections and keeping wiring tidy. The Ghost Immobiliser user's manual will provide specific guidelines specific to your particular model.

During the installation, it is essential to choose a grounding point that's free of debris and paint. The installer must also make sure the immobiliser's CAN H as well as CAN L wires are connected to the appropriate ports on the vehicle's ECU. The wires can be connected or soldered based on the model. Using a high-quality connector is recommended to ensure a sturdy and secure connection.

Once the installation is complete, the customer can activate the Transport Mode. This permits mechanics or valet parking to use the vehicle without having to know the pin code. To accomplish this, the user must press the button for service on the dashboard 5 times within 2 seconds. The system will confirm this by displaying 5 indicators.

The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a great choice for those who rent out their vehicles frequently through platforms like Turo. Having an immobiliser can also lower insurance costs since it significantly decreases the risk of theft.

Getting Started

If you're looking for a solution to safeguard your vehicle from theft, you can't go wrong with an autowatch ghost immobiliser. It will stop your car from starting even if a criminal steals or copies the key. It's possible due to its advanced technology, which prevents the engine from starting until the right PIN code is entered.

The device works by connecting to the vehicle's CAN bus network which allows it to communicate with the ECU directly. It uses the buttons on your steering wheel and dashboard to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your vehicle. This is the ultimate system to safeguard your pride and joy. It will keep its value intact in the event that you decide to sell it.

Installing Ghost's immobiliser is straightforward, but you must follow the instructions to avoid electrical issues and malfunctions of the system. First, you have to locate and identify a constant 12V power source as well as an adequate grounding point on the chassis of your vehicle. Then, you can start connecting the wires to the immobiliser. Be sure to use high-quality connectors and soldering methods to ensure a strong connection. Make sure to shield the connections with heat shrink tubing or insulation tape, or other materials to avoid short circuits in electrical power.

Once TheKeyLab have been connected, you are able to connect the battery and start the engine to determine if the immobiliser is working. When everything is functioning correctly, you can install it in a secure location beneath the dash or anywhere else in the vehicle. Be sure to cover it well to prevent thieves from getting into it.

The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it complies with the highest standards of security and is a fantastic deterrent to car thieves. It is impervious to hacking and key cloning and cannot be disabled without a code. The device is simple to use, and can be set to a service valet setting so that your vehicle will not be activated when you take it for an MOT or service.

Wiring

The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It connects directly to your vehicle's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable as an addition to your car. In contrast to other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with your vehicle's factory settings.

The system is also inaccessible by thieves using scanners for diagnostics. This is due to the fact that it doesn't transmit and receive radio frequency signals, and it uses CAN data to communicate with your ECU. In addition, it doesn't need any modification to your vehicle's existing key fobs.

To use the Ghost Immobiliser, simply turn on your car's ignition and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. You are now able to start your vehicle and drive safely.

Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning, while protecting its value. In Transport Mode you can temporarily disable the Ghost Immobiliser if you need to give your vehicle to service or valet park.

You'll require a constant power source (12V) as well as an earthing point to complete the installation of a Ghost immobiliser. Make sure that both are well-insulated and safe to touch. It's also recommended to use cable ties to bundle and secure the wires, since this reduces the risk of theft by thieves. Make sure you verify the location of these points to avoid making mistakes and mark them with the help of tape or a label. Examine every connection for signs that they are wearing out. Connectors that are loose could cause problems with the system, so be sure that they're firmly in place and securely insulated. Finally, don't forget to test the Ghost Immobiliser after the installation is completed. This will ensure that the unit is operating properly and that all connections and insulation are secure. If you encounter any issues, you must be sure to resolve them immediately.


Testing

The Autowatch Ghost Immobiliser is a cutting-edge car security system that integrates seamlessly into your vehicle's ECU to stop unauthorized engine start. The innovative technology protects your vehicle against hacking and key cloning as well as other methods employed by thieves to steal vehicles. The Ghost is also able to work in conjunction with other alarm and tracking systems to provide the best protection for your vehicle. The Ghost's unique features and secluded design make it a preferred choice for car enthusiasts and security-conscious motorists alike.

To ensure the proper integration of the Ghost Immobiliser, it's important to follow every step of the installation procedure. The best way to begin is to refer to the wiring diagram for your vehicle, which will serve as a guideline for locating and connecting the wires required. The next step is to determine the power and grounding sources. Once you've found them, you'll be required to mark them so that they're easily identifiable during the installation process. It's important to use high-quality materials and tools. Hand tools are a must in making connections that are precise and a multimeter can verify electrical values and ensure security. Insulation tape and cable ties will help keep all connections tidy and neat. A Ghost-specific user's manual is also available.

Before proceeding with the installation it is essential to test the system by entering the PIN code and starting the vehicle. This will ensure that the immobiliser is working as intended, preventing unauthorised vehicle starts. It is recommended to complete this routinely as part of your regular vehicle inspections to ensure that the system is working correctly.

After the installation has been completed, you are now able to start driving your car with confidence. The Ghost will protect your pride and joy from potential car thieves. It will ensure that no one is able to escape with your car even if they don't have the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts to steal or tamper with. This lets you locate your car if it's stolen.

The Ghost is compatible with a range of vehicles, including those made by the majority of major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to find out more about our service and installation options. We are a TASSA Installer who is registered, a certification that guarantees that we adhere to the strictest guidelines and procedures when installing our products. This assures insurance companies, customers, and law enforcement that installations are done safely and correctly.