Autowatch Ghost Immobiliser Installation

The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's subtle, doesn't have keys or LEDs and is concealed within the vehicle's wiring.

The user can also disable the system for a short period of time by using Transport Mode when renting out their vehicle. This guide will guide you through the steps of installing an Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against key cloning, hacking and relay attacks. The system links directly to your vehicle's ECU and is secured by a unique PIN code that you can choose. It is undetectable by thieves using diagnostic scanners or other modern methods. It is not able to be disabled using circuit cuts.

The system is simple to use, but it's important to have professional installation to ensure a smooth and secure connection to your vehicle's ECU. Installers who are approved by Thatcham can assist with the installation and programing of your Ghost system. They can also recommend an alarm or tracking system to complete the protection package for your vehicle.

To prevent an accidental deployment of airbags or short circuits To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. Once this is done the installer is able to safely begin work. Basic hand tools are useful for making precise connections, while a multimeter can be used to check the electrical properties and safety. Cable tie and insulation tape are crucial to ensure connections are secure and ensure that wiring is neat. The Ghost Immobiliser user's guide will provide specific instructions tailored to your model.

During the installation, it is essential to choose an area for grounding that is free of paint and debris. The installer must be sure that the immobiliser's H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. These wires can be plugged in or soldered based on the model. To ensure a secure and long-lasting connection it is recommended that you choose a high-quality plug.

Transport Mode can be turned on by the client after the installation is completed. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. To do this, the customer has to press the service button on the dashboard 5 times in a matter of 2 seconds. The system will confirm this by showing five indicators.

The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's a great choice for those who rent their vehicles frequently through platforms like Turo. An immobiliser can reduce the cost of insurance, as it lowers the chance of theft.

Getting Started

If you're looking for a solution that will protect your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. The device protects your vehicle from starting even if a criminal steals or copies the key. This is due to its sophisticated technology, which is designed to stop the car's engine from starting without the correct PIN code is entered.

The device works by connecting to the vehicle's CAN bus network and allowing it to communicate with the ECU directly. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence which only you know. This makes it impossible for anyone else to start your car. This is the ultimate security system that protects your pride and joy and will ensure its value when you want to sell it in the future.

Installing an immobiliser from Ghost is simple however, you must follow the steps to avoid electrical issues and system malfunctions. You'll need to find a 12V power source and a good grounding on the car's chassis. After that, you can begin to connect the wires that will be used to activate the immobiliser. Use high-quality connectors, and soldering techniques to ensure an effective connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to avoid short circuits of electricity.

Once the wires are connected, you can connect the battery and start the engine to test if the immobiliser is working. Once everything is working properly then you can put it in a secure place under the dash or somewhere else in the vehicle. Make sure to cover it in a secure manner to ensure that thieves cannot get it into a compromising position.

The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it is in compliance with the highest standards of security and is a fantastic protection against car thieves. It is resistant to hacking and key cloning and cannot be disabled without the code. The device is easy to use and can be set to the service valet setting to ensure that your vehicle will not be activated if you bring it for an MOT or servicing.

Wiring

The Ghost Immobiliser is a cutting-edge security system that's designed to stop theft of vehicles. It connects directly to the vehicle's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable to your vehicle. The Ghost Immobiliser will not interfere with the factory settings of your vehicle unlike other aftermarket systems that require the removal of circuit elements.


It's also completely undetectable to thieves using diagnostic scanning devices. The system does not send or receive radio frequency signals, but instead uses CAN data for communication with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.

To utilize the Ghost Immobiliser, simply switch on the ignition of your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. You are now able to begin driving your car safely.

Once installed The Ghost Immobiliser can secure your vehicle from hacking and key cloning, while protecting the value of your most prized possession. In Transport Mode you can temporarily disable the Ghost Immobiliser in case you have to hand your vehicle to service or valet parking.

To complete the Ghost Immobiliser installation, you'll have to identify an energy source that is constant (12V) and an earthing point. Ensure that these are both well-insulated and safe to touch. It's also recommended to use cable ties to bundle and secure the wires. This will reduce the risk of being tampered with by thieves. To avoid committing mistakes, double-check these points and mark them with labels or tape. Examine all connections for signs they are wearing out. Be sure to ensure that all connections are securely in place, and properly sealed. Don't forget to test your Ghost Immobiliser after the installation is completed. This will ensure that the unit is operating properly, and that all connections are secure and insulated. If you encounter any issues, you must be certain to fix them immediately.

Testing

The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that integrates seamlessly into your car's ECU to block unauthorized engine start. Its cutting-edge technology safeguards your car from hacking, key cloning, and other methods that thieves employ to steal vehicles. The Ghost works in conjunction with existing alarm and tracking systems to provide the best security for your car. The Ghost's unmatched features, coupled with its discreet design makes it a sought-after choice for car enthusiasts as well as security-conscious drivers.

In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow all steps of the installation procedure. The best place to start is to refer to the vehicle's wiring diagram that serves as a guideline to locate and connecting the necessary wires. After that, you'll need determine the power source and grounding points. Once you've found them, you will have to mark them to make them easily identifiable during installation. In addition, it is vital to use only the best tools and materials. Hand tools are a must in making connections that are precise and a multimeter can confirm electrical values and guarantee safety. Cable ties and insulation tape will help keep all connections tidy and neat. A Ghost-specific user's manual is also available.

Before you begin installing, it's important to test the system by entering the PIN code and starting the vehicle. This will ensure that the immobiliser is working as it should and prevent unauthorised vehicle starts. This procedure should be carried out regularly as part of your routine inspections of your vehicle to ensure the system is always working correctly.

After the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will safeguard your vehicle from potential car thieves. It will ensure that no one can escape with your car even if they don't have the correct PIN code. The Ghost can also be paired with a tracker that is approved by Thatcham to detect any attempts to steal or tamper, allowing you to locate your vehicle if it's stolen.

The Ghost is compatible with a wide variety of vehicles, including those from all major manufacturers. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to learn more about our services and installation options. We are a TASSA Registered installer which guarantees that we adhere to strict standards and procedures for installing our products. This ensures customers, insurance companies, and law enforcement agencies that installations are performed safely and correctly.