Ghost Immobiliser Installer

Ghost immobilisers can be an affordable and efficient method to deter car theft. It uses inputs from your steering wheel, dashboard, and indicator lights to create a unique pin code that only you can alter.

You'll require the following items to install the Ghost immobiliser A basic hand tool set, a multimeter and cable ties. It's recommended to refer to a user's manual to get specific instructions suited to the model of your immobiliser.

Cost

The Autowatch ghost immobiliser is a revolutionary device that safeguards your vehicle from hacking and key cloning. It works by reading the buttons on your car's inputs and generating a unique number that will allow you to start your car. It does not emit radio signals and is therefore difficult to detect. It is a great deterrent to theft, especially in high-risk areas. It also helps prevent your vehicle from being taken while it is in the garage for repairs because it will not start without the correct PIN code.

Unlike other immobilisers, the ghost immobiliser is not dependent on batteries or power cables. It connects directly to the CAN data network and can be easily transferred from one vehicle to another. This makes it a perfect option for those who own luxury and high-performance cars.

Installing a Ghost is easy and quick. Technicians who have been DBS security-checked and registered with TASSA can complete the installation in a matter of hours. Before beginning the installation process, it's essential to identify a source of constant power (12V) and an earthing point on the vehicle's chassis. You can use a wiring diagram to locate these wires and double-check their location to ensure they're in order. Label the wires with labels or tape to keep track of them.

After you've installed the system, it's time to test it for any issues or problems. If you encounter any issues during the test phase, it's best to seek out a professional. When you're confident that the immobiliser works correctly you can have peace of mind from knowing that your car is protected against thieves.

If you live in an area that has a high level of risk, it is an excellent idea to purchase an immobiliser. It will make your car more secure and could even reduce your insurance premiums. It could also help you sleep better at night. The cost of installing the immobiliser is only a small cost for the peace of mind it gives.

Installation time

The Ghost immobiliser provides a simple, cost-effective solution to protect your vehicle from theft. It utilizes inputs from buttons on the steering wheel, dashboard and door panels to create a unique PIN sequence that must be entered before the engine starts. This makes it nearly impossible for thieves to gain entry into your vehicle. You can change the code at anytime to prevent previous drivers or mechanics from using the same code. It is compatible with trackers, so that if your vehicle is stolen, you can locate and retrieve it.

Use basic hand tools and the user's guide when installing a Ghost immobiliser. The manual contains safety guidelines and specific instructions tailored to your vehicle model. Additionally, The Keylab should always disconnect the battery before beginning the installation process to prevent the possibility of airbag deployment or short circuits in the electrical system. It is also a good idea to utilize heat shrink tubing as well as insulation tape to shield connections from moisture and other environmental elements.

Once you have disconnected the battery and you are ready to begin the installation process by identifying the CAN H and CAN L wires in the wiring diagram of your vehicle. These wires are essential for the proper operation of the immobiliser. Therefore, it is essential to identify them. You can test the wires' resiliency using a multimeter to verify that they are connected in the correct way. Mark the CAN L and CAN H wires using labels or tape to help keep track of their locations during installation.

Next, you will need to connect the CAN H and CAN L wires to a power source that is constant (12V) and provides the ground connection. You should also use a fuse tap to ensure that the connections are protected against power surges. Once you've found a power source that is suitable, you can connect the immobiliser.

You can test the system when you've installed it. If the system is operating properly, it won't start until you enter your pin code. This makes it almost impossible for thieves to steal your vehicle and can be used in conjunction with a Thatcham approved tracker or alarm.

Security

Ghost immobilisers are a quiet defense that stop theft of vehicles by connecting to the vehicle's CAN data network and demanding an unobtrusive pin code before the engine can start. They also block signal boosters and device spoofing. These are the most common techniques that thieves use to steal vehicles. They can be utilized with many vehicles, and can also be hidden so that they are difficult to spot. They can also be turned on in service mode, which enables you to turn your vehicle over to a mechanic without having to remove the device.

It is important to hire a professional to install the ghost immobilisers because poor installation can cause them to be ineffective. Installers who are not trained may connect the wires incorrectly, or place the device in a location that is obvious to thieves. This could cause the device to malfunction and may cause damage to your vehicle. Additionally, a wrong installation can void warranties on both the device and your car.

The installation process for ghost immobilisers is a complex process, requiring patience and precise work. The installer should be aware of and mark the CAN H and CAN L wires, and double-check their locations to ensure precision. The installer must also locate a power supply that provides constant 12V and test the wires for the proper connection.

In the case of a crash the immobiliser will shut off the ignition and display a warning message on the dashboard. It will also send a notification to the owner via the CAN H or CAN L wire and inform them that their vehicle has been involved in an accident. The device can even be activated remotely in the event that the driver is injured.

A Ghost immobiliser makes a great option for luxury cars since it doesn't affect their style or performance. It is a good option for drivers who want to safeguard their investment and avoid costly repairs. It also helps lower insurance costs as insurance companies offer discounts to car owners who install the device. The device can also be used in conjunction with a GPS tracker by police to track down and locate stolen vehicles.

Warranty

If you're seeking to increase the security of your vehicle an immobiliser ghost is the best solution. These revolutionary devices are discreetly integrated into the wiring system of your vehicle and are virtually unnoticeable. They can also be activated and disarmed using an app for your smartphone, giving you peace of peace of mind when you leave your vehicle without a guard. Ghost Immobilisers have the added benefit of saving money on insurance premiums.

Ghost immobilisers protect your vehicle from being stolen by blocking the signals that your key fob sends to the engine control unit. This stops the engine from being hacked or copied, making it harder for thieves to get access to your vehicle. The device can also signal a warning or shut down your car's engine if it detects any tampering.

The main concern for vehicle owners is whether the installation of a Ghost immobiliser will impact their warranty. This issue is complex and depends on a number of factors. The quality of installation and the equipment used are both crucial. Professional installers will make sure that the device is properly integrated with your vehicle's wiring to limit the risk of interference. They will also make sure that the device does not interfere with the vehicle's aesthetics or functions.


The kind of vehicle you own is also important. Different manufacturers have different rules regarding modifications. Dealer warranties, for instance, may be more lenient than aftermarket warranties. To know how Ghost Immobilisers may affect your coverage, read the terms of your vehicle's original manufacturer's warranty.

It is recommended to disconnect the battery before starting the installation to prevent short circuits and airbag deployment. After you've completed that, you need to be aware of the CAN H and CAN L wires. These are the wires that supply power to the immobiliser. It is important to mark these wires using either a tape or marker so that you are able to identify them in the future. It is also recommended to test each of these wires with a multimeter in order to determine their electrical values.