The Ghost Immobiliser

Immobilisers can be an effective weapon in the fight against car theft. They prevent vehicles from starting without a key fob and work well to stop hotwiring as well as traditional methods of vehicle theft. However, more modern methods such as key replication and relay theft are becoming more common.

The Ghost Immobiliser is designed to fight these trends and make your vehicle undetectable. It doesn't make use of LED indicators radio signals, key fobs, and is quiet and discreet.

Easy to install

The Ghost Immobiliser, a revolutionary device, connects to the CAN data network of your vehicle to prevent key cloning or theft. It is a TASSA approved product and has been approved by insurance companies. It is almost undetectable by thieves and operates quietly. It makes use of buttons on your steering wheel, center console and door panels to create a unique pin code sequence that has to be entered before you are able to start your car. You can create as many as 20 different sequences in order to increase security. It's easy to install and doesn't require additional hardware.


It is recommended that you use an accredited installer of CAN immobilisers that is skilled in your particular vehicle model to ensure the most effective results. Ideally, they will have a workshop close to you that you can visit to have your installation completed. You will also find an array of tools and materials that can assist you in the installation. These include hand tools, a multimeter, and insulation tape as well as heat shrink tubing to secure the connections. A user's manual will give you instructions for the wiring in your vehicle.

Before beginning the installation remove the battery from the circuit to prevent short circuits and airbag deployment. Double-checking the CAN L and H wires is vital, as incorrect identification can lead to improper integration of the system. It is also a great idea to label or mark the wires. Additionally, you can use a multimeter to verify that the identified power source provides a consistent 12V supply.

Advanced thieves employ a variety of tactics to bypass Ghost Immobilisers, including jamming or spoofing. These methods are based on amplifying signals from the key fob to the electronic controller unit. With advanced anti-jamming techniques and a constant monitoring system, your vehicle can be protected from these sophisticated attacks.

Increased security

A ghost immobiliser provides an additional layer of protection to your vehicle from theft. It is an PIN code security system that can be activated by pressing buttons on your dashboard or steering wheel which makes it difficult for thieves to access the device and take your vehicle. The device is designed to be hidden within your vehicle. It does not have LEDs, or other signals to alert potential burglars to its presence. It is directly connected to the ECU of your car through the data bus. This means that it is not susceptible to hacking or relay attacks.

This system is a great investment for those who own luxury cars, since they are at a higher chance of theft due to their value and popularity. Its security features are enhanced to protect against key duplicates, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers may be paired with an app, which means that you can easily arm and dearm them. They can also be equipped with a service/valet mode that permits you to temporarily disable them while your vehicle is being repaired or serviced.

Another advantage of a ghost immobiliser is that it doesn't require cutting of wire. This is a fantastic option, particularly if your car is newer and doesn't have an immobiliser built in. Some systems may also be equipped to work with a GPS tracking device, providing an additional layer of security to your vehicle. Having a GPS tracker can also help you reduce the cost of insurance. If you choose to buy an immobiliser that is ghost, make sure it's TASSA-certified and an expert installer installs the device for you.

Compatibility with all major brands and models

The Ghost Immobiliser was made to work with all major car models and makes, securing your precious possessions from theft. It generates a unique pin number using buttons on your steering wheel, console or door panels. You must enter this code before you are able to drive. The system is tamper-proof and undetectable. It's also comes with a three-year guarantee. It is also fully endorsed by insurance companies and insurance companies, which means it can lower your premiums.

The Ghost system differs from the standard immobilisers that use the key fob to provide ignition control. It is connected directly to the engine controller via the CAN bus. This means it's tamper proof, virtually impossible to remove or disable and is not stolen by organised car thief groups. The Ghost system can also be paired with an iPhone app to monitor remotely and management.

You can create an PIN that is simple to remember, yet mathematically unattainable to thieves. You can customize and change the PIN at any time to protect your vehicle, even if it is located in a parking lot or on the street. You can also select a valet or service mode in case you need someone else to drive your car for a brief period, for example when it's in garage for maintenance. This feature can also help keep your vehicle from being stolen by a dishonest mechanic. You can select the Ghost Call alert to give you more security. It will notify you when your vehicle is moving or has been moved.

Convenience

The ghost immobiliser guards your vehicle from theft methods such as key relay or cloning. It works by connecting with the car's data network CAN and blocking communication with the engine ECU. This makes it very difficult for criminals to hack or copy your vehicle.

After installation, you'll be required to enter a PIN number up to 20 digits using the buttons on your dashboard and steering wheel to start the engine. The system is completely hidden and therefore unnoticeable by thieves. It doesn't emit radio frequency signals. It can be configured with a PIN number that can be altered by the user, which adds to its security. The system is designed to avoid circuit-cutting, making it almost impossible to alter.

If you do have a problem remembering your PIN, there are some systems that allow you to communicate with the immobiliser using an app on your phone to disarm it immediately. Some even have a service/valet mode that allows you to start your vehicle temporarily, for instance, when you need to drop it off for servicing or valet parking.

The Ghost Immobiliser also is undetectable by thieves since it transmits no radio signals. This is an important benefit over other security systems that are sold aftermarket. It is also easy to use and doesn't require any complicated wiring. It can also be used in conjunction with a dash cam for additional security. This dash cam is the Thinkware F70, which features clear & sharp 1080p HD dashcam footage and Format Free Technology and parking mode. The system is able to be hardwired to guarantee maximum performance and longevity.

Installation

If you're looking to safeguard your vehicle from theft it is important to select the correct immobiliser ghost . This device can stop car thefts by preventing the communication between key fobs as well as the engine controller unit. This device stops thieves from stealing and cloning the signal used to start your vehicle. It can also detect the presence of a tamper and alert the vehicle owner.

The device is simple to install and can be integrated with the existing systems in your vehicle. It does not require any modifications to vehicle wiring and can be placed in a concealed location such as under the dashboard. Follow the steps in the manual to ensure that the device is properly installed. After installation, it is crucial to test the system. This will ensure the ghost of the immobiliser functions as intended.

You can buy an Autowatch Ghost 2 immobiliser and then have it installed by a reputable installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to take it off or disable the system. Installation generally takes between 2 and 3 hours.

When installing the Ghost it is recommended to look up the wiring diagram for the vehicle model you are using. This will allow you to find the CAN High & CAN Low wires needed to connect your Ghost to the engine of your vehicle. It is also essential to double-check the connections to make sure that they are safe and well-insulated.

After the installation is completed, you are able to start using the Ghost Immobiliser normally. It will disable the ignition of your vehicle if you do not start it using the correct PIN, which you will need to enter yourself. The ghost of the immobiliser can be set to Service/Valet Mode for when you require your vehicle to be to be serviced or valet-parked.