Autowatch Ghost Immobiliser Installation

The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It's discreet It does not include LED indicators or key fobs, and is hidden within the wiring of your vehicle.

It also permits the user to temporarily disable the system through Transport Mode to use it when they are renting out their vehicle. This guide will take you through the installation process of the Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning and relay attacks. The system is linked directly to the ECU of your car and secured by a PIN code you select. It is undetectable by thieves using diagnostic scanners and other advanced methods. It cannot be disabled by cutting circuits.

The system is simple to use, but it's essential to use a an expert installation to ensure a smooth and secure connection with your vehicle's ECU. ghost 2 immobiliser review approved installer from Thatcham can assist with the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complement the protection package for your vehicle.

First, the installer needs to disconnect your battery in order to avoid accidental airbag deployment or short circuits. Once this is done the installer is able to safely begin work. Basic hand tools can be used to ensure precise connections. A multimeter can be used to verify electrical values. Insulation tape and cable ties are also necessary for securing connections and keeping wiring neat. Lastly, the user manual offers specific instructions specifically tailored to the Ghost Immobiliser model you have.

It is essential to choose a grounding location that is free of paint or debris during installation. Installers must also ensure that the immobiliser's wires CAN H and the CAN L are connected to the appropriate ECU ports. The wires can be plugged into or soldered based on the model. A high-quality connector is recommended to ensure a long-lasting and reliable connection.

Transport Mode can be turned on by the client after the installation is complete. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. The customer must press the service icon on the dashboard five times within two seconds. The system will confirm this by displaying 5 indicators.

The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a great choice for anyone who frequently rents out their vehicles on platforms like Turo. Immobilisers can also reduce insurance premiums, since it significantly decreases the risk of theft.

Getting Started

If you're looking for a solution that will protect your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser. The device protects your vehicle from starting even the theft or copies the key. It is possible because of its advanced technology that stops the engine from starting until the correct PIN code is entered.

The device connects to the vehicle's CAN bus network and allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and the steering wheel to create a unique sequence only you can identify and makes it impossible for someone else to start your car. This is the ultimate system to safeguard your pride and joy. It will ensure that your car's value remains intact in the event that you decide to sell it.

Installing a Ghost immobiliser is easy however, you must follow the directions to avoid electrical issues and malfunctions in the system. First, you need to locate and determine a constant 12V power source as well as an adequate grounding point on the vehicle's chassis. After that, you can begin to connect the wires that will be used to activate the immobiliser. Use high-quality connectors and soldering methods to create a solid connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to prevent short circuits of electricity.

After the wires have been connected, you are able to reconnect the battery and start the engine to test the function of the immobiliser. If everything is functioning properly you can place it in a secure place under the dash or elsewhere in the vehicle. Be sure to hide it in a secure manner so that thieves can't alter it.

The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it meets the highest standards of security and is a great protection against car thieves. It offers superior protection against key cloning, hacking, and relay attacks. It can't be disabled without knowing the code. The device is also simple to use and can be set into a service valet mode so that your vehicle isn't activated if you take it in for servicing or an MOT.

Wiring

The Ghost Immobiliser is a cutting-edge security system designed to prevent vehicle theft. It is directly connected to the vehicle's CAN bus and communicates with the ECU which makes it virtually undetectable to your vehicle. Unlike other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with any of the factory settings for your vehicle.

The system is also undetectable by thieves using diagnostic scanning tools. This is due to the fact that it does not transmit and receive radio frequency signals and it uses CAN data to communicate with your ECU. It also doesn't require modifications to your current key fobs.

Enter the sequence to disarm (either two or one buttons) and then switch on the ignition of your car to use Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. You are now able to start your vehicle and drive in a safe manner.

Once installed, Ghost Immobiliser safeguards your vehicle against hacking or key cloning, while also protecting its value. If you have to surrender your vehicle to a valet or service provider, the Ghost Immobiliser can be temporarily disabled in Transport Mode.

To complete a Ghost Immobiliser installation, you'll need find a source of constant power (12V) and an earthing point. Make sure that both are well-insulated and can be touched. It's also recommended to use cable ties to bundle and secure the wires. This will decrease the chance of being tampered with by thieves. To avoid making mistakes, make sure to double-check these points and mark them with the use of tape or labels. It's also a good idea to inspect all connections for signs of wear and tear. Make sure all connections are in place, and properly insulated. Also, don't forget test the Ghost Immobiliser after installation is completed. This will confirm that the unit is operating properly and that all connections and insulation are secure. If there are any issues, be sure to address them immediately.

Testing

The Autowatch Ghost Immobiliser is an innovative vehicle security system that integrates seamlessly into your vehicle's ECU to block unauthorised engine start. Its cutting-edge technology protects your vehicle against key cloning and hacking and other methods commonly employed by thieves to steal cars. The Ghost also works in tandem with other alarm and tracking systems to offer the most complete protection for your vehicle. The Ghost's unmatched features, coupled with its discreet design makes it a sought-after option for both drivers who love cars and security-conscious drivers.

It is important to follow the steps of installation in order to ensure correct integration of the Ghost Immobiliser. A good starting point is to consult the wiring diagram of your vehicle that will serve as a roadmap for locating and connecting the wires required. After that, you'll need determine the power source and grounding points. Once these are found then you'll have to mark them in a way that they're easy to identify during the installation process. It's essential to use high-quality materials and tools. Basic hand tools can assist in making connections that are precise and a multimeter can verify electrical values and ensure safety. Insulation tape and cable tie will keep all connections neat. A Ghost-specific user's guide is also available.


Before you begin installing, it's important to test the system by entering the PIN code and starting the vehicle. This step will confirm the immobiliser is working as it should and prevent unauthorised vehicle starts. This step should be performed frequently as part of your regular vehicle inspections in order to ensure the system is working properly.

After the installation is completed Once the installation is complete, you can drive your vehicle with confidence. The Ghost will safeguard your vehicle from thieves who might steal your car. It will ensure that no one is able to take your car away even if they don't have the correct PIN code. The Ghost can also be used with a tracker that is approved by Thatcham to identify any attempts at tampering or theft, allowing you to locate your vehicle in the event of it being stolen.

The Ghost can be utilized on a wide range of vehicles and is compatible with all major brands. If you're interested in securing your car with this cutting-edge device, call Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA registered installer, a certificate that assures us that we follow strict guidelines in the installation of our products. This guarantees customers, insurance companies, and law enforcement agencies that installations are carried out safely and properly.