UPVC Door Lock Replacement

UPVC doors are a fantastic deterrent to break-ins. However they have a few limitations that can be addressed by installing deadlocks.

If your uPVC front door lock feels loose or floppy, it may be time to replace the barrel lock. This easy DIY project will enhance the security of your home as well as improve its appearance.

Removal of the old lock cylinder

If you're noticing that your front door feels flimsy when you lock it, or your key struggles to turn, you could have a damaged lock cylinder. Replacing it will ensure smooth operation and improve security. The procedure is simple and should only take 30 minutes. The only tool you'll need is an screwdriver. Open your door and check the edge of the door near the lock the cylinder. You will see an encapsulated screw roughly in line with the bottom of the cylinder. Take it off using the screwdriver and store it safely.

You'll have to know the size of your current cylinder to ensure you can find an appropriate replacement. The sizes typically range from 60mm up to 110mm. To determine the size of the lock, you will have to remove the screw from the faceplate. You can also turn the handle of the lock while the cylinder remains in place to determine the amount it moves.

Next, you'll need to determine the cylinder's diameter and the length of the cylinder cam. These measurements are crucial to ensure that the new lock will be able to fit into the door. The dimensions of the lock can differ based on the kind of uPVC. You'll need to select an alternative that is the same or slightly bigger than the cylinder you have.

Once you have the measurements, it's time to remove the old cylinder from the door. It's an easy task, but you must do it correctly to avoid damaging your frame or door. Make sure that the door is propped up or secured so that it won't shut between steps.

A professional locksmith is a good choice if you aren't sure how to do it yourself. They can offer expert advice, flawless execution, and peace of mind. They can also help you in choosing a secure and secure lock system. However, DIY has its perks, including saving cash and gaining new techniques. You only need a little patience and the right tools such as a Phillips Screwdriver. It's not as difficult as you might think to change your uPVC locks.

Installing the new lock cylinder

It is essential to follow the correct procedure and make sure you use the correct measurements when replacing locks at your front door. This will not only stop future issues, but it will also increase the security of your home and allow you use a key from both sides of the front door. You should measure the uPVC lock's overall length as well as the backset and cylinder size before replacing it. These measurements will ensure that the lock cylinder can fit inside the uPVC and function properly without any gaps.

The first step is to remove the handle from the door by loosening it using an screwdriver. Next, you need to locate the barrel screw that holds the cylinder lock in place and then remove it. You can then take out the old lock by inserting the key into the cylinder, and turning it both left and right. You can take the cylinder out when the key is in one of these positions.

Installing the new cylinder into the front door is easy and will involve the same steps you used to remove the old one. You should be aware that the new cylinder will not fit in the space left by the previous cylinder. This is due to the fact that the cylinder has to be aligned correctly so that it can be closed and locked using the key. Make sure that the cylinder is in the center and has a circular keyway.

Installing a new uPVC lock for your front door is not difficult, but you must be careful not to harm the handles or the door frames. If merton double glazed door lock replacement Links to an external site. whether you're able to complete this project, hire a professional who is a Checkatrade-approved locksmith and has experience working with the various types of doors. Locksmiths can save you time and money by finishing the job quickly.

Reattaching the door handle

There are a variety of reasons why you could want to alter the lock on your front door. You might have lost a lock key, the previous tenant hasn't returned keys, or you would like to upgrade to an extra secure lock. Change the barrel on a lock on a uPVC door is a straightforward task that can be accomplished in just five minutes. You'll need a Phillips-head screwdriver, a new cylinder of the lock and a spare key (if you intend to use one). Make sure the door is propped open or secured in a secure way so that it doesn't close during the process.

It's not as difficult as you might think to change the lock mechanism on the uPVC door. It is important to begin by identifying the kind of lock that you have on your front door and the size you require for the replacement. For older doors there are strip locks as well as multipoint lock options. It is easier to replace your uPVC door lock if you know the brand and type it is.

After replacing the cylinder, you must reconnect the handle. First, you'll need loosen the set screw on the shaft of the handle using either a screwdriver, or Allen key. This will allow you to remove the handle and expose the shaft of the spindle. If the shaft is threaded you'll have to loosen it a bit and back it up using a screwdriver in order to ensure a proper fit.


After you've tightened the screws on the new handle and lock cylinder, it's time to test the lock. Make sure that the key fits and turns easily, and that the handle's locking mechanism is working properly. If you don't feel comfortable doing this yourself you can have a locksmith do the job for you.

Be aware that uPVC lock mechanisms and door handles require regular lubrication to function properly. This is especially applicable in areas that experience high wear and tear, like those that are frequently used or closed and locked. A tiny amount of lubricant could help in prolonging their life and ensuring they function correctly.

Test the new lock

A door lock made of pvc is an essential element of your home's security. However, like any other piece of equipment it is susceptible to wear and tear over time or become compromised. Regular maintenance is the key to a properly functioning uPVC locking system. This will prevent issues from surfacing and could compromise the security of your home. This can be accomplished by lubricating internal mechanisms every six months using a certified fluid. This will keep the lock running smoothly and stop it from rusting and becoming damaged.

Aside from the regular fluid, you could also use a silicon-based spray to loosen the keyway and make it easier to insert the key. This is a simple DIY fix that can save you money in the long in the long. Avoid using WD-40 since it can leave a oily residue that could damage the lock.

It is important to test the new cylinder after installation before you can be sure that it will work correctly. This can be done by testing the handle from both inside and outside of the door. Then, put the handles back in place and re-insert spindle screws to ensure everything is in place. Re-insert all the screws that were holding the handles in place. Give yourself a pat on the back for a good job!

If you are trying to increase the security of your home A locksmith can install additional features, such as door chains or sash jammers. They can also assist you to choose the right lock for your home. A professional can also assist you in determining the right size cylinder for your doors, which is vital because a poorly-matched lock can compromise security.

The cost of replacing the uPVC door lock may vary dependent on the kind of lock you select and the number of doors that require replacement. The average cost of a professional locksmith will range from PS75-PS100 per hour, however this cost will vary based on your location and the type of lock you need. It is also crucial to compare locksmith costs before choosing a locksmith.