Replacement Locks For Patio Doors at Lowe's

Replacing the lock on your patio door can be an easy way to improve the security of you home. But, it is important to maintain the lock regularly and to install the lock correctly.

To replace the lock on your patio door, it is vital to know what type the lock you have currently is. You can determine the type by observing the screw hole size and the type of face plate at the end.

Identifying the Lock You Have

If you're considering buying new hardware for your lock, it's essential that you be aware of the differences between kinds of locks. This will assist you in find the perfect replacement, making sure that your home is secure and secure.

The most common type of lock is the cylinder lock, sometimes referred to pin and tumbler lock. This type of lock makes use of a combination of top pins, bottom pins, and springs to keep the key hole and plug secured. Cylinder locks are available in a variety sizes and it is essential to know the exact length and width of the cylinder you currently have before buying the replacement.


To measure the width take off the screws that hold the cylinder in place and then carefully remove it. Then, take a measurement in millimeters between the outside edge and the inner end of the cylinder. Compare this number to the measurements of the lock you intend to purchase. This will ensure that your new lock is of the right size and will fit in the hole of the door lock that is already in place.

Another method of determining the proper size of your lock is to test it using a key. If the key slides easily into the cylinder, it is the same width as the rekey kit you require. However, if the key isn't able to slide in, it is likely that your cylinder is using a an alternative keyway and can't be rekeyed to accept the key brand.

It is recommended to read the manufacturer's instructions that come with a rekey kit for each lock, since each lock has its own unique set of installation requirements. It is recommended to take the time to test the new lock after installing it to ensure it is working well and gives you the highest level of security. It is also crucial to be aware of any additional features the new lock might have in order to determine the ease of operate.

Measure the Width

A patio door lock that is not functioning properly could cause serious security problems. It is essential to check your locks frequently and replace them if needed. This will ensure that they are working properly and secure. It could also help prevent issues like a damaged latch or keyway. If your current locks are worn or damaged, you can get replacements at Lowe's which will offer the security your home needs.

It is crucial to measure the door to your patio before buying an additional lock. This will give you an idea of the size you should purchase and help you avoid the danger of buying an unsuitable lock. To do this, you'll need to determine two dimensions: the backset length and the depth of the case. The first refers to a distance between the edge of the lock's face and that of the middle of the hole through which the handle spindle passes through. The second refers to observing the depth of the lock from the outside.

When deciding on the kind of lock you want to use, it's important to think about how you will be using your doors. For example, if your sliding doors open horizontally, then you'll need to choose a top and bottom tab style lock that is able to engage with the strike plate, stopping the door from being forced or lifted open. If your patio doors swing vertically, you'll need to opt for mortise locks that have an attached hook latch which provides additional security.

It's important to note the location of the screw holes when determining the size of your lock. Some mortise lock screws will be round and others are square. double glazed door lock replacement ewell www.repairmywindowsanddoors.co.uk 'll also need to know the positioning of the keyway. Some keys have a vertical design and others are bent at 45 degrees. Take a photograph of the lock using your digital camera to ensure you receive the proper replacement.

After you've gotten your measurements it's time to look for an updated patio door lock. You can find a range of top-quality products on the internet, with many branded options offering sophisticated security features that will protect your home. Choosing the right lock is an investment in the security of your home and security, so it's essential to research and read reviews prior to buying. Also, make sure to clean your locks regularly to stop dirt and other debris from affecting the functioning of your doors.

Make sure to examine the screw holes

Patio doors are an important part of your home's security. They should be checked for signs of wear and tear to ensure they function correctly. Over time, the locks and spindle securing the handles on the exterior and interior are likely to require replacement. A durable lock is not just a barrier to unwanted entry, but also increases security, energy efficiency, and security.

If you aren't sure of the exact lock that your patio door has there are a number of options to narrow your search for a replacement. First, you must determine what kind of keyway it uses. Aluminum patio doors are often fitted with mortise locks with a rectangular cutout as well as E2126 or E2079 locks are installed in a recess on the frame. If you have an electronic camera, uploading a picture of the lock may help you determine what kind of lock it is.

You can also determine the type of lock by examining the screw holes. The screw holes on a majority of sliding patio door locks line up with the latch keeper that is attached to the side jamb. However, they are not always identical. For instance there are screws that are larger than others, and may have an alternative threaded end. Some screws also include washers or a nuts attached to them, which may affect how they fit into the lock hasp.

Once you've got a clear idea what type of lock you own it's time to begin planning for the installation of a new lock. The first step is to clean the lock using a soft cloth or brush to get rid of any debris or dirt that could hinder its operation. After you've cleaned the lock, apply a silicone-based lubricant to keep the locking mechanism smooth and quiet.

In the future, it's a good idea to replace the old screws with more long ones. This will give you more grip and allow you to easily install the new lock. After you've done this, it's important to check the handle to see how the latch works with the lock.

If the hasp does not engage, you might need to install a washer or hex-nut behind it to allow it to catch more of the lip of the door. You can place a shim on the side of the lockkeeper on the jamb and see if that helps.

Check the Lock Snib

The snib acts as the mechanism for locking that is located inside your door handle. The snib is able to be turned off and on to open or close your patio doors and is the first thing you need to look at if your locks aren't functioning correctly. Also, you can check the keepers (located in the top and bottom of the door frame) to determine if they are loose or have a misalignment that could cause them to shear. Make sure your snib is properly placed, and that the lock isn't jammed or otherwise blocked in any way.

The most common patio doors locks are steel mortise locks that lock sliding glass doors. Incorporated into the door frame they are available in various designs and are a reliable security measure. Some are designed to hold keys while others have an oval-shaped cutout that makes it easy to lock and unlock.

Another popular option is a step-on lock that has a thumb-screw design that secures your sliding doors in place, without requiring you to turn the knob or turn the key. These locks are typically found on older metal-framed patio doors, but could be a great choice for securing wood- or vinyl-framed sliding doors as well.

While you're examining your existing patio door lock, make a note of the type and size of screw holes it uses to fix the escutcheon plate and lock body. This will help you pick a lock that has the appropriate screw holes. It's also a good idea to inspect your strike plate to ensure it's properly secured.

If you own Jason Windows boltlock slider doors between 2000 and 2009, ensure that the screws holding the door in place and aren't missing or loose. The screws hold the snib in a partially open "vent" mode, allowing airflow while promoting security. They are also important to stop your lock from being sheared. All locks should be maintained and cleaned regularly to avoid dirt, dust, corrosion or debris from obstructing their operation.

If your snib is damaged it could be possible to replace the entire strike plate and snib assemblage. If your snib just requires alignment, you can correct it by removing the strikeplate using a the help of a putty knife and then removing the adjustment screws (located between the screw). You will then need to move the strikeplate up or down until the tongue of engagement is aligned with the Milgard logo.