Replacing a Replacement Lock For Composite Door

Composite doors are extremely popular because of their fashionable aesthetics, better insulation and security. They aren't immune to problems such as warping and dropped hinges.

One common problem is a lock that sticks and is difficult to operate. This can increase your risk of damaging a key inside the lock, or making it impossible to close.

Key Won't turn

Composite doors are a great alternative to traditional uPVC doors, offering increased security and energy efficiency along with attractive appealing designs. These doors are popular for commercial and residential properties due to their low maintenance requirements as well as their durability. As with all doors, they'll require some care and attention over time to maintain their appearance and function. One of the main issues with composite doors is that they may become sticky, making it difficult to open and close them. This is a problem that can be resolved by lubricating both the locking mechanism and the cylinder. Although it is tempting to go for WD-40, we recommend using a graphite or silicone-based grease instead, as oils-based fluids can have adverse impacts on the door locks.

Mechanisms and lock cylinders are exposed to the elements on a regular basis so they'll wear out over time. This can cause the components to become loose or corrode, which can make it difficult for you to open your composite door.


A cylinder for a lock that has fallen can cause the door to move out of alignment and make it difficult to lock or close. A local Locksmith can replace the cylinder and make sure that the entire locking mechanism is working again.

It is also worth mentioning that composite doors are prone to warping, swell and bow over time, which can affect the performance of your door. We strongly recommend pulling the handle up (or throwing it) each time you shut the door to ensure the locks are fully engaged and help prevent damage in the future.

Window Ware offers a wide range of products that will satisfy your requirements. These systems are designed to work with these types of doors and can be put in place with ease by professionals. Contact our expert team at 0161 879 9333 for more about the many options for your composite doors and how they could help you.

Sticky Locks

The locking mechanism on composite doors can become stuck and make it difficult to insert the key and turn it or even pull it out. This is often caused by dust and debris building up in the mechanism's internal. You can fix this by applying lubricant to the cylinder and latch. Lubricant can be found as an aerosol spray or powder that can be applied using a brush, such as graphite powder. Avoid using petroleum-based lubricants, such as WD-40 and sewing machine oil. These can further damage your lock.

Another issue that is common to composite doors is the hinges falling. This can happen if hinges are not regularly oiled, particularly when the door is used frequently or heavily. A simple hinge adjustment can resolve this issue and eliminate the need for replacing the hinges.

The weather seals could be worn out or loose as time passes. This could cause draughts enter the home and rainwater. You can buy a new weather seal at any hardware store, online retailer or another retailer. Install it according to the manufacturer's instructions.

If your composite door is showing signs wear and tear, it could be time to replace your lock. The type of lock you need will depend on how secure you want your home to be as well as what kind of door you have. Window Ware offers a range of high-security multipoint locks designed for composite doors that will help you keep your home safe and secure.

If your composite door has a lock that isn't functioning correctly, you can call a professional to repair it for you. If the lock is damaged beyond repair, you might need to replace the composite door. To avoid this, make sure to select a high-security lock that's specifically designed for your composite doors. This will ensure a good fit and improved security while maintaining your home's aesthetic. Before installing the lock, make sure that it is properly installed and that all parts are in good operating condition. A professional can install your new lock quickly and efficiently. They will ensure that it is installed correctly and functions as intended.

Cylinder Issues

If your key will not turn in the lock it could be due to an issue with the cylinder or the mechanism for locking inside. They can be replaced easily and quickly by a local locksmith who will be able to change the cylinder to one that functions and also repair the entire door lock mechanism so it's functioning correctly. Visit our Locksmith Prices page to find out the cost.

Another issue that is common is the problem of sticky locks. This can be caused by many different things. It could be due to an unbalanced or warped frame, a misaligned pivots or dirt build-up on the internal mechanisms of the lock. This could cause the lock to be difficult or impossible to open close, close, or latch properly. In the majority of cases, you can fix this by adjusting hinges or the mechanism of the lock.

Spraying a light oil on the hinges and locking mechanism each six months will to prevent this. This will help to ensure that they operate effortlessly without resistance.

It is also crucial to carry out regular maintenance on your composite doors to ensure they are in good working condition. Using a door maintenance kit can aid in keeping them looking good and also help prevent stains. It can be purchased at your local hardware store or on the internet and can be purchased for a reasonable price.

If your handles are having trouble to open or lift, or are having to be forced into this, it could be a sign that they need to be repositioned or that the gearbox is faulty. www.repairmywindowsanddoors.co.uk Links to an external site. can fix the issue yourself by loosening the center screws on each hinge, lifting them until they reach the desired position and then tightening them.

If you've tried adjusting the hinges and the handle's position, but are unable to get it to work, it could be an issue with your cylinder or the multipoint locking system. A Locksmith can replace the locks by installing the new multipoint lock, or an entirely new cylinder. They can match the new lock with the old parts to ensure that your door will continue to function as it should, and won't void your insurance policy.

Multipoint Locking System Problems

Multipoint locking systems are a great method to increase the security of your home. They can be found on a variety of uPVC or composite doors. Like every other piece of machinery, it could develop problems with time.

If you're experiencing issues with the cylinder, the locking points or even the door handle itself, there are some options to solve the issue. For example, if the handle is squeezing, simply re-lubricating the mechanism will help. In more severe cases it may be necessary to re-screw the handle or completely disassemble it to solve the problem. It is always advisable to seek professional advice before trying to solve these kinds of problems.

The most frequent issue is when the door begins to swell due to warm temperatures. This is typically because the handle needs to be lifted up (or "thrown") when closing the door to activate all of the locking points on the door. The door will rest on the middle latch, and it is more likely the door will warp or swell over time if you don't do this. To prevent this it is recommended that you adopt the habit of throwing the door handle every time you close it to ensure that all locking points are engaged.

If you're experiencing any of these issues, it is recommended to speak with a uPVC or composite specialist Locksmith who can identify and fix the door lock replacement made of composite. They can also offer professional advice on how to keep your door in good condition to prevent future problems.

If your uPVC door or composite door isn't closing properly, it could be that the frame is too small or the door itself is misaligned. If the frame is too small, it's going to need to be resized. If the door isn't aligned with the lock, it's going to need to be replaced. In most instances, a Locksmith can solve these issues in half an hour or less. A screwdriver, as well as some other tools is enough to make the necessary adjustments.