UPVC Door Handles Replacement Guide


Once you have the right measurements, replacing the upvc door handles is a straightforward DIY project. These measurements include the distance between the backplate of the handle's fixing centres (sometimes called PZ) and the center of the key hole.

The most commonly used kind of uPVC door handle comes with two levers inline one internal and one external, connected by spindle. They operate the multi-point lock which is used in uPVC, aluminium and some wooden doors.

Brands and finishes

A broken uPVC door handle can be more than just a minor inconvenience, it can also make your home vulnerable to intruders who might be able break the lock and gain entry into your home. It is imperative to act as soon you notice that your uPVC handles are deteriorating.

Fortunately, it is an easy task to replace your uPVC door handles. You'll require a few tools and a few careful measurements. In most instances, you'll just need to install your new uPVC handles and you'll be good to go. It is always recommended to select locks and handles that are of the highest standard of security.

You can select from a wide range of uPVC handles. These include lever/lever, pads handles, offset and snib. Lever/lever handles consist of two inline handles that can be moved, are extremely popular with homeowners. Pad uPVC handles are smaller in size and usually have an offset design that permits you to keep the outside of your home secure after the entry.

An offset uPVC handle is comprised of a fixed and one movable pad. This type of handle is found on sliding patio doors. Snib handles are like offset handles but they can be employed on uPVC french doors.

It is essential to take into account the style of your current doors and windows when choosing the replacement uPVC handle. The handle should be in line with the colour and finish of your doors. Certain handles are available in a variety of finishes, including white and black and others can be found with more fashionable options like gold or chrome.

When you're taking measurements, it's vital to be sure to get the screw-to-screw dimensions correct. The PZ measurement is the distance from the center of the hole in the spindle to the centre of the keyhole. The screw-to-screw measurement is the distance between the screw hole on the existing handle and the closest screw on your door frame, and it's crucial to measure this accurately to determine an appropriate replacement.

Measurement & Fitting

A uPVC door handle has two levers that are located on either side of the lock mechanism allowing for easy operation both inside and out. Handles are an essential component of the security system on the door. They offer a comfortable grip, and they function without effort. With the right uPVC handles, you will be able to ensure your door is secure and look great in the process.

Choosing the correct uPVC handle can be difficult and confusing as there are many different sizes, shapes and designs on offer. When you are choosing the right handle replacement for your uPVC door, you should consider three important dimensions. These are the backplate fixing centers, lever and key hole size and the spindle size. Incorporating these elements will ensure that your new handle will be perfectly fitted to your uPVC doors and gives you a perfect fit.

The process of measuring these points is fairly straightforward, but you should be as precise as you can. You might end having a handle that isn't properly fitted and could cause issues when opening your uPVC doors. The top screw at the centre of the backplate is the primary measurement. This is also known as the PZ dimension. This is the distance between the axis or handle lever of the keyhole and the central point of screw. This is usually 92mm however, it could be different.

It is also important to ensure that your uPVC handles are equipped with the number of keyspindles required to operate your multi-point locking system. Ideally, they should be the same as the number of keys that you use to lock and unlock your uPVC doors. Some older doors may have only one spindle to operate the lock, but more modern doors will have two spindles that allow for independent operation from both sides.

The most undesirable thing to have is a drooping or sagging uPVC door handle since this can cause a great deal of stress on the locking mechanism within and may result in broken components. To avoid this, search for an assortment of uPVC door handles that come with spring cassettes. These aren't just aesthetically pleasing but they also reduce the pressure that operates on the door locking mechanism and could prolong its time to last.

Broken Spring Cassettes

If a door handle gets stiff, it could be caused by a fault within the tubular latch itself. It is usually a straightforward solution that can be solved by repositioning the handle's internal fixing plates. First take the door off and ensure that there are no obvious obstructions on the latch plate like loose screws or indications of internal parts peeking through. If this is not the case, then one of the springs on your uPVC handles could require a change.

A door handle repair kit is the most efficient method to do this. This kit will include all the tools needed to remove the handles and then reposition the cassettes. Follow the steps to do this and you'll soon have a sagging or drooping uPVC door handle that's once again fully operable.

A floppy uPVC door handle could be due to thermal contraction, but it is usually an indication that the gearbox inside has broken. This isn't something that you can fix at home, but it will require the help of a locksmith expert.

It is essential to choose an authentic replacement gearbox for your uPVC doors. This will ensure everything is properly installed. Using an aftermarket replacement that is less expensive could cause problems, like a faulty lock or reduced security for your home.

Another option is replacing the entire uPVC handle mechanism and lock. This will not only solve the sagging issue, but will also ensure that the handle is functional and secure. This is not a cheap or quick solution. It will require the removal of your old uPVC handles and replacing them with a new handle. This is only suitable for double-glazed doors with spring handles, as the door will have to be repaired. You can also purchase a set of handles with springs built-in. This will save you time and money.

Can I Fit a uPVC Door Handle to an aluminum or timber door?

There are a variety of things to take into consideration when choosing the right doors for your house. uPVC doors provide durability, security, and energy efficiency. aluminium doors are modern and pleasing to the eye. In door handle repair taunton of the style of door you're looking to install the appropriate handle is vital. It is essential to select the appropriate handles for your property regardless of whether you're replacing the handles you have had or adding new ones. Our uPVC replacement door handle guide will help you to make the right choice and install it with confidence.

The process of changing a uPVC door handle is relatively simple and requires only basic tools. You will first need to remove the existing handle. It is possible to remove the screws holding it in place by using the help of a screwdriver. After the screws have been removed, you can pull the handle away from the door.

The next step is to determine the size of the door handle. You'll need to find the middle of the fixing holes on the backplate. This is often referred to as PZ measurement. It determines the handle spindle size. Once you have this information, you'll be able to purchase a door handle replacement that is the correct size.

There are a variety of types of uPVC handles that can be found to meet your needs. Some of them are designed to offer additional security features such as anti-drill protection, cylinder guards and mole grips. These uPVC handles can be installed to uPVC doors, as well as wood and aluminum ones. They are perfect for people who want to enhance the security of their home.

If you're seeking a more traditional uPVC handle There are other options that will suit your needs. These are available in a range of finishes, including black, gold, and chrome. They are typically a little more expensive than standard handles however they can add a stylish look to your door.

Once you have picked a suitable uPVC door handle, it's important that you check the dimensions prior to placing an order. You will need to check the dimensions mentioned above, as well as the lever and keyhole dimension and the backplate mounting centers to ensure that your new handle is the right suitable for your door.