uPVC Window Handle Replacement

Window handles that break can be extremely frustrating, and they could stop your windows from opening. This is because the spindle inside the handle moving, but not communicating with the shoot bolt or roller cam of the window mechanism.

This is a straightforward fix. We offer a selection of replacement upvc handle inline keys, cranked or key locking Espag and Cockspur.

Take off upvc door handle repairs macclesfield from the old one.

Upvc windows are a great option for those looking to upgrade their home. They give a beautiful appearance while decreasing energy costs. However, with time, they get worn and lose their effectiveness. If your window handles are getting worn It could be the right time to replace them.

Fortunately replacing a handle made of uPVC is fairly simple. It's as simple as removing the old handle, and screwing in the new one. It's a relatively simple process and is ideal for giving your windows made of uPVC more of a traditional appearance. The most important thing is to make sure the handle you choose to purchase is a perfect match for your window - if it's too large or small, it will not fit correctly and could not function correctly.

There are a few different types of uPVC window handles, including inline espagnolette handles as well as cockspur handles. Inline espagnolette handles are fixed using two screws on an older double glazed uPVC window. Cockspur handles are secured with three or four screws. They have an "nose", which closes over the wedge on the frame of the window. They are typically found on tilt and turn windows (windows that open to the outside).

The most frequent problem with uPVC window handles is that they become loose or fall off completely making them unusable. This is generally caused by a loosened or missing pin or screw that needs tightening or replacement. If this is the case, it is best to replace the entire handle and not just the handle nut.

If a uPVC window handle begins to become loose, it's best to remove the screw cover caps first. This can be easily done using a screwdriver that is standard. Then, remove the screw that binds the handle to the bottom of the window. It can be tricky but you must be careful to avoid damaging the frame of the window.

After taking the screw off, carefully unscrew and remove the handle from the window. Measure the spindle - the square peg at the bottom of the handle. The size of the spindle may differ based on the type of handle. Make sure you purchase a replacement that is the same size.

Measure the spindle

uPVC windows have a reputation for being durable and low-maintenance however, over time, the handles may become damaged or worn. When this happens, it is an ideal idea to replace the handles with new ones in order to ensure the windows are functional and safe to use. It is a fairly simple procedure that can be carried out by a professional glazier.

The first step is to determine the kind of handle you have. There are numerous types of uPVC handles, such as inline espagnolette handles, or cockspur handles. It is crucial to determine the type of handle, because this will allow you to find the replacement that is the proper size and will fit correctly.

You'll need to measure your spindle after you have identified the type of handle to ensure that it matches to the new handle. The spindle, or protruding piece, is the piece that is inserted into the base of the handle to control the lock mechanism. The length of the spindle is usually measured from the base of the handle up to the end. The length of the spindle is vital to the operation of the window handle, therefore it is crucial to measure it carefully before purchasing new ones.

Also, you will require the handle to be measured. This is the part of the handle that is visible when the window is open. The handle is available in various in color and styles, so it is important to choose one that complements the style of your home.

Another option is to purchase a cranked handle, which can be affixed to the window frame and opens from the inside. The handles are available in various shades and can be used to reduce the viewlines of modern windows. To avoid future problems it is crucial to measure the spindle on a cranked handle prior to installing them.

Espag window handles are commonly found in uPVC windows and use a similar locking system as cranked handles. The primary distinction is that espag handles come with a spindle that is located at the rear of the handle, which drives the internal window mechanisms.

Fit the new handle

Window handles and locks play a crucial role in the security of your house. They are also a great way to add style and flair to your windows. Over time, they can begin to wear out and lose their function. When this happens, it's crucial to replace them as quickly as possible. In some instances, you might need to replace the entire window unit, but in other instances, simply replacing the lock and handle can be enough.

It's crucial to select the right type of handle for your window. There are a myriad of designs to pick from, but it's vital to select a handle that matches the style of your window. It is also important to use a quality product that is resistant to damage and corrosion.

It is important to ensure that the new handle is of the same size as your old one before installing it. If the handle isn't the same size as the old one, it might not fit into the hole and need to be replaced. It is also important to make sure that the new handle can be locked or unlocked with ease.

There are two types of handles made of uPVC that are tilt and turn and espag. Espag handles can be operated from either side to open or close the window. They are often fitted with a central locking mechanism. For windows without central locking systems tilt and turn window handles may be employed. They are typically found in high-rise apartments. They can be used to open and close the window but they are also a great choice for sliding patio doors.

During the process of installation it is crucial to take off any screws' covers that may be covering the mounting screw. You should then place the new handle into the mounting holes and screw it into the hole. Then, you can put back the cap caps on the screws. Then, test the new handle.

The most frequent issues with uPVC window handles is that they loosen or break off entirely. Another issue that is common is a broken spindle that causes the handle to spin without opening the window. If this happens, it's essential to replace the handle as soon as you can.

Test the handle

If you're replacing handles on a new build property or are upgrading your existing windows, it's crucial to ensure that the replacement handle is fitted correctly. This is because it determines how tightly the window will be shut, as well as for security reasons. While it may appear simple however, there are many things that could go wrong. Here are some suggestions to help you complete the task right the first time.

The first step is to get rid of the handles that were previously used and screw caps. This will reveal two screw holes as well as the square cut out for the spindle. You can now measure the length of the spindle. You can do this by dropping something into the middle of the hole and seeing how far it goes. This will give you a maximum length of spindle to fit in your window.

There are several different types of upvc handles. The old-fashioned type is known as a Cockspur handle and the more modern ones are called Espag handles. Cockspur handles are distinguished by a spur which locks over a wedge within the window frame, while Espag handles use an articulating spindle that operates an locking mechanism inside the window.

When choosing an alternative handle, you'll need to think about the step height as well as the spindle length. The step height refers to the distance between the base of the handle and the point at which it engages with the window frame. This measurement can differ between brands and you must check the handles you have to see what the step height is.

It's a common mistake to purchase a handle of similar to your old one, but with the wrong blade length. This could be a problem since if you choose to use an angled blade where you should have employed a flat blade, the handle will break, or you'll find it difficult to close the window.


Cranked or in-line handles are also something to think about. In-line handles have the locking point at the center and can be turned left or right. Cranked handles have an angle between the grips and the locking points and can only be turned in one direction.