Choosing the Right UPVC Door Handle Replacement

Replacing your door handles made of upvc is an easy task but selecting the correct handle can be a challenge. Modern double-glazed handles come with spring cassettes in them, however older models don't have.

If your upvc handle is loose and floppy, there could be an issue with the internal components of the multipoint lock. This article will look at a number of possible issues and their causes.

Handles that are drooping or sagging

UPVC handles are prone to wear and tear, especially in older properties. A broken spring cassette inside the door lever is the most typical reason for a handle that is floppy. This is typically caused by excessive force, and the square spindle that supports the cassette may be displaced or the cassette can be rounded off.

It is good to know that a uPVC handle replacement can be completed in just a few minutes. The first step is removing the old handle unit. To remove it, you must unscrew the fixing screws on the backside of the lever. Once the handles have been removed you can then unscrew the cassette from the square spindle and replace it with the new one.

On the internet, you can pick from a wide selection of uPVC handles available with different finishes. Choosing the right finish will determine the length of time the handle will last and how it is easy to keep clean. Finishes like Resista Stainless Steel, or PVD are designed to resist corrosion and last for up to 25 years.

After you have selected a colour or design, you can select the kind of handle you want. The most popular are lever and pad arrangements. Lever pads feature a lever on the inside and an outside paddle which is typically employed as a security measure to block access by unauthorised persons.

The next step is to measure the dimensions of your existing handle and note them down. You'll need to determine the PZ dimension, which is the distance between the screw hole and the middle of your lever. It is also important to determine how long the handle is and the size of its keyhole. Once you have these measurements, you can then compare them with the handle sizes matrix to determine the appropriate replacement.

Broken springs

Over time, handles made of uPVC may become wobbly or loose. The spring cassette may also break. The springs are used to align the handle lever in a horizontal position. Without them the doors won't lock properly.

Modern uPVC handles are constructed with these cassettes built directly into the backplate. These springs are typically integrated into older uPVC door mechanisms. This isn't something you can fix by yourself, but it's worth having your locksmith examine the situation as this could be the reason for the sliding uPVC handles.

The most common problem associated with uPVC handles is that they loosen as time passes. This is usually due to worn out springs, which are simple to fix. This is usually caused by excessive handling of the handle. The square spindle in the handle will wear down and causes the springs to move.

To fix this, you will need to open the door towards the handle plate and unscrew all screws. This can be done by using the Philips screwdriver. Once the screws are removed the handle can be removed and the plates pulled apart with care. The old springs can be removed and replaced with new springs.

Depending on the kind of handle you have the distance between the two fixing screws may differ and it is important to know when buying an alternative. This measurement is referred to as the PZ and it is essential to use a measuring tape that is calibrated to ensure an exact reading.

After replacing the springs you will be able to operate the handle without any issues. It is recommended to lubricate the internal mechanism to make sure that everything is functioning just as it should. This will ensure that your uPVC door is as secure as can be, and also improve their comfort over time.

Handles that slide around

Handles that slide around can be caused by a number of reasons, but one of the most frequent causes is when the levers of the handle aren't aligned correctly with the lock. This is a problem that can occur with both uPVC and composite doors, but is generally more noticeable on older doors since they are often made from less durable materials that don't resist the elements.


This issue can be fixed by a professional who will re-align the handles and make sure they're in line with the door lock. They will also look at the lock itself to determine what needs fixing. In most cases, a simple adjustment to the handle springs is all that's needed to resolve this issue.

Changing your uPVC door handle is simple enough, but it's important to take the measurements of the existing handles to ensure that you have the proper size replacement. You'll need to determine the distance of the two screws, as well as the dimensions of the keyhole and lever, as well as the distance between them. Then, you can use this uPVC handles size guide to find an appropriate replacement for your home.

Once you have the measurements The next step is to remove the current uPVC handles. It is usually quite easy and requires only a screwdriver to get to the screws that are on the inside of the door. After the screws have been removed, you'll have to take off the handle, and then install the new one.

Before starting, it's worth ensuring that the door is securely open by a wedge to stop it from closing during the course of your work. After the handle has been removed you'll be able to access the underlying parts of the door to fix the issues that cause it to sag.

If you don't have the time or energy to tackle this job yourself, an expert handyman from Fantastic Services can help. They'll employ locksmith opening methods to unlock the door without causing any damage and then replace the faulty handle, making sure everything is working as it should be.

Gearbox damaged

A damaged gearbox could cause the upvc handle to become stiff and lose its function. This can also prevent the lock from being able be opened with the use of a key. door handle replacement wythenshawe Repair My Windows And Doors can be very dangerous and should be dealt with as soon as possible. It is crucial to contact an expert locksmith if you can't solve the issue yourself. They have the tools and expertise to get the job done right.

The first step is to take the handle from its cover plate. This can be done using an instrument that has an angled tip. After you have removed the handle, you can then take out the middle screw that holds the barrel in the position. After removing the middle screw, you'll be able to loosen the two screws that are holding the barrel. Then you can pull the barrel out of the door. You'll have to open the door to accomplish this, so be sure you have someone on hand to help.

Once you have removed the cylinder from the handle you can replace it with a brand new one. It is important to make sure that the new cylinder is of the same size as the previous one. In the event that it isn't, you could end up with an unaligned handle correctly. This can lead to a number of problems, including leaks and draughts.

Many upvc doors have adjustable slots which can be used to tighten or loosen the handle. These are usually located on the inside of the door, near where the handle joins the cylinder. Allen wrenches can be used to tighten the slots for adjustment. Once you have made the adjustments, you can put the handle back on and screw it into. Then, you'll be able to test the handle to make sure that it's functioning properly.

If the door handle made of upvc becomes loose or floppy when it is closed, it's usually a sign that the upvc gearbox has broken down or internal spring components are in the process of breaking down. This can cause the upvc multipoint lock to fail and leave your door open to burglars. If this occurs, it will be necessary to replace the upvc gearbox. The cost will range from PS145 between PS145 and PS280 inclusive of labour.