Replacement Handles For Windows

Window handles are among the most frequently used elements of double-glazed windows. Over time they can get rusty or worn out.

To replace a UPVC window handle you need to know the length of the spindle of the handle you have currently and also its fixings. The best method to do this is to look at the base of your old handle.

Handle

Over time, uPVC window handles and locks can be damaged through wear and tear, accidental or intentional damage. This can result in the lock or handle becomes difficult to open or close, or that it isn't locked at all. It could be tempting to replace the entire window unit if this happens, but it is not always necessary. In many instances the case, a new handle or lock is all that's needed.

The espagnolette style is the most popular uPVC window handle. This has a spindle which protrudes from the handle and slots into a gearbox that operates the multipoint locking mechanism in the window. It's important to match the appropriate handle and lock to your windows to ensure they work together correctly, which is why we stock a wide variety of replacement handles for all kinds of uPVC windows.


It is recommended, when replacing the handle of a uPVC handle using screw covers to protect the screws from rust and ensure they remain secure. Alternatively, it's possible to make use of a spacer or washer to allow for a tighter seal. A screw cap that is on the handle will also keep debris and water from getting into the handle and cause damage.

After you have removed the handle from the window, it is recommended to clean the spindle and the threaded part of the bolt. This will ensure that the handle is fitted and functions properly. It will also prevent dirt from entering the multipoint lock.

Next it's time to install the new uPVC handle. Be sure to go through the directions that come with your new handle and review the previous one to get a better understanding of how to do it. Most of the time, the process is quite simple. However, if you encounter any problems along the way that aren't covered in this article, it's best to contact our team for further assistance.

It is important to note that when replacing a uPVC Cockspur (also known as Espag handle) you'll need the step height of your window to determine the proper size handle. The steps height refers to the distance from the frame or base of the window to where the cockspur's nose handle sits when installed.

Hinges

If your windows are beginning to open and close with a visible gap, it could be due to the hinges not being aligned with the frame. This is usually an easy fix that can be solved by installing a new set of replacement window hinges. We offer a range of different options and even customise the dimensions of the hinges to meet your needs.

We can provide a variety of hinges for upvc and timber windows. These hinges are available in a variety of colors to match the frames of your existing windows. They are also supplied with all the fixings you need to install them. We can supply repair screw packs for double glazed windows using hinges that are older in style. This allows you to cut the thread back into the frame.

upvc door handle replacement www.repairmywindowsanddoors.co.uk Links to an external site. offer a variety of hinge styles that range from standard casement window hinges that can be used with a normal or tilt and turn handle through to fire escape egress hinges that are suitable for use on larger sized side-hung windows. These are designed to open fully in an emergency and incorporate an easy-clean position that makes it easy to clean. We also carry hinges with restricted-egress designed to restrict the opening angle of a window to a maximum of 100mm. This is perfect for families with children.

The sound of a hinge squeaking can be a sign that the hinges are worn out, which is typically caused by the rubbing of metal against metal. A small drop of lubricant may help but if the noise persists it is likely that the hinges will require replacement.

Window plumbs help avoid unnecessary binding, this means that the operating sash of the window is in line with the frame, which ensures that it can be closed and opened correctly. A window that is not plumb may begin to close and open with difficulty or become warped over time creating problems for the seal as well as the appearance of the window.

When purchasing replacement upvc window hinges, be aware that they can be bought in either imperial or the metric sizes. The metric sizes tend to be a little more precise, however it's not noticeable once they are installed. The first corner fixing holes on the track and arm are of a standard size, however the other holes could differ in length based on the original hardware. We advise that you measure the holes in your existing frame before purchasing any upvc hinges to be sure that they are of the correct dimensions.

Crank

The normal wear and tear that happens over time can cause damage to the window handle, lock or crank mechanism. This could make it difficult to open and close your windows. It can also compromise their security. If your window is difficult to open or shut, or if you hear a clicking sound when you turn the handle, it could be a sign you need to replace the mechanism. If you are unable to lock your window, or the multipoint lock is damaged, it may also be worth looking into replacing this component of the hardware as well.

A new window crank is able to be replaced with minimal effort, but it's important to ensure that you purchase the correct size replacement. Make sure the replacement has the same step height as the old one and can be measured by measuring the distance between the crank arm guide bushing and the notch in the track that runs across the bottom of the window frame. Alternatively, you can take a measurement of the length of the spindle on your current handle to determine what size you require to replace it with.

The type of window handle that you have will determine what kind of crank mechanism is needed for your casement or awning windows. Espag handles are equipped with a spindle that is a mental component on the back that is attached to the frame of the window and is the motor for the window mechanism while cockspur handle have pegs which are fixed to the frame with screws of three or four which are fixed to the frame and sash.

It's easy to replace the window operator after you've identified the correct replacement. First, remove any trim mounting screws that are on the casement cover of your window and then carefully lift it off to reveal the insides of the window operator (Photo 1). Compare the new lever to the old one and take off any rusted trim screw. Then, attach the replacement to the window frame, replacing any screws that were damaged or bent, and place the casement cover back over the mechanism.