Why is My Skoda Kodiaq Key Fob Not Working?

Georgina Cianci had been driving her Skoda Kodiaq car for more than a year before it began to do bizarre things. It would lock and she'd often find her son trapped inside.

skoda car key not working TheKeyLab are typically quite minor and can be fixed with a simple fix or replacement. The problem may be more serious though.

Dead Battery

The most common cause of the car not responding to the button is a dead battery inside the key fob. It is possible to replace the battery or modify the remote keyless system receiver module. If this is the case, make sure that you get an alternative battery that is compatible with the dimensions and voltage of the original.

The transmitter portion of a key fob houses the battery, which is flat and can be changed easily. To remove the battery, you simply fold the front over and insert a screwdriver into the marked area. Then, replace it with a fresh one, ensuring that the positive side is facing upwards.

When the battery is depleted it will begin to degrade, reducing the range of the fob, and requiring you to be closer to your car in order to open or start it. The battery's lifespan can vary between two and four years based on the method of use. If the battery has been exposed to water, you can try to activate it by cleaning it with isopropyl alcohol and drying it.

Sometimes, your key fob will cease to function due an issue with the hardware or software. In this case, the best option is to contact an expert locksmith to fix it. They'll have the right tools and equipment to complete the job quickly and efficiently. Additionally, they will offer an upfront price and will not cause damage to the vehicle.

Another issue that can cause your skoda kodiaq key fob to not function is the presence of metal objects near it. These objects can disrupt radio transmission, and even stop your vehicle from beginning. In certain situations, you can resolve this issue by removing your keys from the ignition. You can purchase a faraday cage to shield the key from electromagnetic interference.


If your skoda key does not function it could be because the battery is dead or there is a bad connection in the transmitter module. You can test the batteries using a multimeter, voltage meter or reprogramme the remote keyless receiver using an OBDII scanner tool. You can also check for looseness or corrosion in the connectors of the transmitter module.

Loose Clips

The Skoda kodiaq key fob is made of metal clips that help to keep the battery in place and complete the circuit. These clips can be loose and cause a weak connection, which makes it difficult for the remote from responding to commands. It's therefore important to check the contacts of the clips using a voltage meter or multimeter. You can tighten the contact if they are loose to improve the connection. If the problem persists then you might need to replace the transmitter module or electronic chip.

The best source to locate authentic skoda parts is the Skoda dealership. The experts will examine your vehicle using the appropriate diagnostic equipment to determine the root of the issue and offer the replacement. They will also offer an assurance on the part.

It doesn't matter if you're on a trip with your family or taking your children to school, you need to be prepared. KODA Karoq can handle anything. This seven- or five-seat SUV comes with two- and four-wheel drive, powerful engine options, and a large boot with Tethering loops. The car is also equipped with a number of Simply Clever features that will make your journeys simpler and more enjoyable.

You can keep your kids entertained on long trips by installing an iPad holder in the headrests. The VarioFlex system allows you to fold, move or remove the rear seat. The KODA Karoq is able to be set up to meet your specific needs. There's a sleep kit that includes a blanket for the rear seats.

Simply Clever also offers a handy umbrella storage compartment in the driver's door, a storage area for small items within the centre console, as well as an holder that can hold a drink bottle within the doors. You can also connect your smartphone using SmartLink to the infotainment system to answer messages and calls or listen to music or access online navigation and information services.

You can even fold the backrests of the rear in a single step to carry larger objects that wouldn't fit into the large boot. And if you need a helping hand opening the tailgate, the electronic tailgate opener with Tip-To-Close function is at your disposal.

Water Damage

Key fobs can be used to lock your car, unlock it and also activate certain features for comfort. However, sometimes the remote key fob can stop working and this could be due to numerous problems. This can be caused by an unresponsive battery or buttons that are worn out, as well as water damage. These issues can be easily fixed and can save you money on the purchase of a new key.

If you own a skoda key fob that has been damaged by water the first thing to do is remove the battery and replace it. This is an easy step that anyone with a DIY skill can do. A flat CR2032 battery can be purchased quickly and easily inserted into the small slot in the key fob. It is a good idea to clean the electronic component with isopropyl alcohol and allow it to completely dry before placing the battery back.

After the battery has been replaced, it is important to check that the buttons on the key fob are functioning correctly. If the button requires pressing repeatedly to work it means that the transmitter module or electronic chip is defective and needs to be replaced. This replacement can be sourced from a reputable dealer who will reprogram the keyfob, and then provide a an entirely functional remote.

Another possibility is that the issue isn't with the key fob but rather the car's battery. Check the car's battery by professionals. A deficient or dead vehicle battery can stop the keyfob from communicating with it. Schindler's Garage can perform a quick diagnostic battery test to determine if the problem is with the vehicle or the key fob.

If your key fob has been exposed to a lot of water it's probably damaged and will cease to function. It's helpful to take it apart and examine the circuit board for any signs of corrosion or green materials. These components aren't fond of water and are more prone to fail when they are wet. If it's been in the wash cycle or only a short exposure to clean rainwater, it might be able to be repaired and only require a new battery.

Electronic Chip

The key fob contains an electronic chip that relays the signals that are sent by your remote to unlock your vehicle and to start it. When the chip is faulty the remote won't transmit any signals and the car will not respond to the key. There are a few different factors that could cause this to happen, including:

The most common reason a key fob like a skoda kodiaq key fob doesn't work is because it has an inactive battery. The transmitter part of the key fob holds a flat disc battery, typically CR2025 or CR2032. To replace it, you need to open the fob with a screwdriver and carefully pull off the front cover to expose the transmitter. Then, remove the battery and insert a new one, ensuring that it's the exact model as the one that is currently in use.

It is also possible to determine if the contacts on the battery are damaged or missing. This could prevent the transmitter receiving signals from the wireless remote. You can utilize a multimeter or a voltage meter to check the contacts and make sure they are secure. If they're damaged it might be necessary to replace the key fob.

Finally, the key fob could also stop working if the device isn't properly programmed. This is a delicate process that should be handled only by a technician with the proper diagnostic equipment. They'll first require to identify what is causing the issue and then decide if the issue is fixable through programming or if they'll have to replace the antenna or chip.

When the key fob is within a metre within a metre of the vehicle, the anti-theft system in your Kodiaq will be activated. The immobilizer will verify that the signal is coming from the correct key. If not, the vehicle will shut down several systems such as the ignition coil, fuel pump and injectors to prevent it from getting started. This means that it's important to keep your key fob clear from anything metal like the Faraday cage in order to avoid any problems. You can also try reprogramming receiver module with an OBDII scan to see if that solves the issue.