Replacement Handles For UPVC Windows

uPVC handles can become loose or fall off. Thankfully replacing them is an easy job with the proper tools.

Check for the screws or pins that hold the handle in place to identify the type of handle. Once you've identified them, remove the screws or pins and carefully take the handle off of its spindle.

Espag Handle

Espag handles are the most commonly used kind of handle you will find on double-glazing uPVC windows. They're flat and have a circular shape. They are typically made from uPVC but they could also be made of different materials, based on the window's design and style. Handles are available in a variety of designs and colors to complement the decor of your home.

The espag may also be called a cockspur or spade. It can be used to replace a damaged handle on older uPVC window. They're not as secure as modern handles but they do offer a simple locking mechanism. The handle is equipped with two studs, called mushrooms, that move up and down as the handle is rotated. They are anchored to a metal plate, which is known as a keep on the frame. The handle can also be found in a cranked model, which allows more space for your hand and a sleeker look or an inline version that some prefer.

These types of uPVC handles are usually used on double-glazed windows and older timber windows. The handles are usually made of aluminum or uPVC but they can also be made from other materials. Window handles made of Espag are locked by a key, or with wedge blocks that go between the frame and handle. They are also simple to maintain and you can purchase replacement parts should they break.

You should verify the size of spindle at the back of your handle prior to selecting the correct espag handle. The spindle should have a maximum diameter of 7 millimeters. Also, you should determine the height of the step where the handle is connected to the frame of the window. The proper size handle will ensure that the window shuts tightly.

Monkey tail handles are a wonderful choice for older windows. They also work well with contemporary windows and come in right-hand or left-hand versions. They have a chic reeded end detail and a slim backplate that fit inside the frame of the window. These handles are also lockable and come with a decent step to height.

Venetian Handle

There are a myriad of styles to choose from when replacing window handles made of upvc. There are Espag handles, Cockspur handles, spade or blade handles, and tilt and turn handles. The type of handle you select will depend on the style of windows you have as well as your personal preferences. Also, you should consider the size of the handle and the length of the spindle. It is essential that the handle is able to fit into the screw holes and has the right spindle.

The cockspur handle on windows made of upvc is among of the most popular styles. They are available in a broad range of colors and finishes. There are locks and non-locking versions. The major distinction between the two is that a cockspur hand can be locked with keys. The keyed handle is used in high-security buildings and is more secure than a handle that is standard.

Venetian handles, just like Espagnolette handles, are generally attached to the frame using two bolts. They are low-projection from the frame and don't cut blinds like other window handles. They are also ideal for high-rise apartments because they can easily be cleaned from the inside. These window handles are an excellent choice if you're looking for an attractive and practical replacement for your windows made of upvc.

Regardless of the design of the window you have, there's a handle that is suitable for the window. When choosing the replacement handle, it is important to be aware of the size and shape of the screw holes are, the height of the step as well as the length of the spindle and the handle. The handle should be able to support the weight of the window when it is closed.

A tilt-and-turn handle is perfect for windows made of upvc that open from the side. It serves two purposes and allows you to both tilt and turn the window, which is useful for ventilation, cleaning and security. It's also easy to operate, even using one hand. The handle can be set to secure the window in a closed position or can be set to tilt to allow you to enjoy the fresh air without worrying about burglars breaking in.

Pear Drop Handle

If you find that your uPVC window handle or lock is damaged, you'll likely want to replace it with a similar model. You can do this yourself. First, close your window and remove the screw on the base handle. Once you remove the two screws, the handle will come off. You'll then be able to open the multipoint lock and remove it. After the new handle is constructed, you can screw it into it. If the handle has a caps for screws, you should also replace it.

Espagnolette handles are the most common kind of handle for uPVC windows. The handles are identified by their flat strip shape they are used in conjunction with multipoint locks secured around the frame to provide the highest levels of security for your home. They are available in a variety of designs and are available with either a right or left opening.

Cockspur handles are a more traditional design of handle. They are popular with those who appreciate heritage improvements, and for those who prefer an appearance that is more traditional. They have a shaft that runs through the handle and into the gearbox. The gearbox then turns a set of shootbolt rods which secure the window.

Pear drop handles provide a higher level of security and are more modern than cockspur designs. These handles are a great choice for anyone looking to update their windows while maintaining the classic feel of their home.

This Web page Drop Espag Handle is a tribute to 19th Century ironmongery and is perfectly suitable for casement windows with a heritage style, ensuring that your home's exterior is finished off with an elegant aesthetic. This handle can be paired with a teardrop operating stay and dummy remains to create an antique window that matches perfectly.

Choosing the correct handle to replace your uPVC windows can be a daunting task but our easy guide and helpful tips will ensure you receive the best results. Bridgewater Glass can help you upgrade your entire window set, or replace your current uPVC handle and lock.

Handle that turns and tilts

Double-glazed windows can be tilted up or down to allow ventilation. Tilt-and turn handles are used. The handle is rotated, and a locking mechanism activates when the window is slid in either direction. These windows are very popular in Europe. They allow for better ventilation, and they are safer. To ensure safety and functionality, the handle that replaces a uPVC U-turn handle must be compatible with the window's type as well as the locking mechanism.

Tilt-and-turn windows are usually made of uPVC, aluminum or timber frames. Timber frames can be utilized by homeowners who prefer an older-fashioned style to their home. UPVC frames are the most affordable option and offer great durability as well as energy efficiency and low maintenance requirements. Aluminum frames are more expensive, but offer superior durability and resistance to corrosion.


The uPVC handle turns and tilts similarly as an espagnolette. However, it is much heavier and bulkier because it is used on larger windows. They are also more durable due to the fact that they must be able to withstand more forces when the window opens inwards and can be tilted.

When you are looking for a replacement tilt and turn handle the main thing to consider is the handle is able to be locked into one of four positions, which will prevent the window from opening completely into the room. This can be done by using a key, which is ideal for children who are around as it stops them from opening the window too wide and causing injury.

As a result, the majority of tilt and turn window handles that are on the market will have this feature built in with the exception of cheap Chinese-made items. Sealco Scotland stocks a range of premium tilt and turn handles by manufacturers such as Hoppe Trojan and Sensei.

It is essential to measure your existing handle before purchasing a tilt-and-turn window handle. This will assist you to determine the best style. You will need to measure the distance between the screw fixing holes which are normally 43mm centre to the centre. You may need to remove the caps that cover the covers or the sprung loaded backplates from some handles in order to reveal the screw's locations.