Replacement UPVC Door Handles

Find the perfect handle for your door, whether you are replacing your handles or adding extra security. Upvc handles are simple to install and conform to the required 92mm centres for multipoint locks.

The most important measurements to consider are the backplate fixing centers and key hole dimensions for levers and levers. Compare these measurements to your existing measurements prior to making a purchase.

Lever/Pad

Lever pad handles are made up of a lever on one side, and a paddle-shaped handle on the other. These are designed for use with key wind locks. However they can also be attached to multipoint split spindle door locks.

Our range of upvc handle lever pads are available in a wide range of finishes. These will be listed in the drop-down list after you have selected the right handle for your doors. Some styles of handles are not available in all finishes. It is recommended to look over the technical drawings and dimensions for the item you are looking to ensure you get the right size and fit.

It is crucial that when choosing a new set of Upvc lever pad handles, they are in line with the PZ (distance from the handle spindle to the centre of the hole of the cylinder) of your multipoint door locks. This is because these need to be aligned in order for the doors to stay locked, regardless of whether you are viewing them from the inside or outside. Our handles are designed to fit a wide range of conventional cylinders, but it is always worth double-checking prior to purchasing.

You'll need to remove your handles that you have already installed and then dismantle the lock case if upgrading to dual spindle levers for your handle as this will require an additional split cylinder inline. These are available separately and we have a full technical diagram to examine in the images for each product.

It is recommended to loosen the screws holding your existing door handle and then inspect the mechanism. If the screws aren't tight enough it is possible to loosen them more. After that, you can take the spindle from the door handle and replace it with your new upvc handle. It is important to ensure that the handle is in the correct position before installing it. You can do this by placing your finger between the door frame and the handle to make sure that it's level.

Lever/Lever

The lever door handles are used to operate a multi-point lock with the Euro cylinder. They are found on many upvc double doors as well as wooden and aluminium doors. They come in two types, with the lever inside and a paddle outside. Sprung - these have a spring cassette fitted within the backplate that helps bring the handle lever into an upright position. Non-sprung: These do NOT have a mechanism to spring the handle lever into a horizontal position.

To fix a sagging door handle lever you'll need to locate the hole or pin that is the detent access point. upvc door handle replacement eastleigh repairmywindowsanddoors.co.uk 's typically small, protruding ring, or rectangle, found on the handle base plate. Once located you can loosen the set screw using the help of a screwdriver, and then take it off to allow the lever to return to its horizontal position.

Once the handle is in a horizontal position, you can re-install the screws and tighten them so that the handle stays secured to the base plate. It is also recommended to apply a threadlocking adhesive to the threads of the screw to increase the grip and stop them from becoming loose over time.


Lever door handles that droop could be the result of many factors. The most common cause is that the fixings aren't tight and the lever bearing to get tangled up against the door. It is also possible that the levers haven't been operated at the correct angle, which stretches the latch mechanism, preventing it from fully springing into operation.

Another common reason is that the sprung lever isn't functioning properly and this is typically due to the spring not being in the proper position within the backplate. The simplest way to check this is to move the handle to check whether it changes to the horizontal position.

It is essential to repair any door handles that are damaged immediately. This could cause excessive wear on the screws, and the handle might fall off the base plate. You should also tighten loose screws frequently to prevent them from becoming looser.

Lever/Snib

These upvc door handles are also known as 'Snib' handles and feature a snib button at the top of the lever that can be pressed down to lock your door if you don't use a Dummy lock. They usually come with a Fullex 68PZ (that's 68mm between the spindle's centre and the lever or lock centre) door lock. We also stock a range of door handles with 68PZ from brands like Ferco and Fab & Fix.

Change your door handle is a cheap option to modernize your home, whether you're replacing your handles or installing new ones on doors you've constructed in your home. There are a variety of styles of door handles made of upvc with traditional levers on backplates, straight or curved short latches and knob handles with dummy handles for multi point locks which are perfect for French doors.

Lever on backplate handles are usually rectangular in shape, however you can also find oval or circular-shaped models that are referred to as rose door handles. These types of door handles are equipped with a lever or knob on a backplate which is placed behind the lever or knob and is often referred to as the rosette, however some backplates can be removed for concealed fixing.

The handles are available in a variety of finishes, including chrome and coloured finishes to complement your door and other hardware such as knobs, bolts and hinges. Some handles are supplied with grub screws, which assist in firmly attaching the knob or lever to the spindle. Some handles are equipped with bathroom spindles that can be used for bathroom locks. They also come with an release mechanism that turns the thumb and can be used on doors for bathrooms.

Mortise

The tubular latch is most likely to be the culprit if your uPVC door handle is stuck open. This can be caused by many things however the most frequent is a lack of lubrication in the latch plate. This can be resolved quickly by opening the door and spraying lubricant over the lock and handle. It could also be that the latch plate has become detached from the backplate. This is a more complicated issue that requires the assistance of a specialist.

A multipoint door handle is a great solution to the problem of a sticking door handle. The handles are inserted into the faceplate of the door and are operated with an actuated thumb turn knob or key which activates an electronic cam that locks the deadbolt. The handles are available in a range of sizes that will fit various types of uPVC doors. They are also available in a variety of attractive finishes to match existing hardware. These handles can be purchased online or from a local locksmith. They are easy to install and come with clear directions.

To choose a replacement handle set, you'll be required to determine the PZ dimension of the cylinder. This is the distance in millimetres that lies between the outer edge of the door frame and the center of the hole for the handle. You'll also need the type of lock that is installed on your door, irrespective of whether it's a mortise or hook lock. Once you know these measurements, the simplest way to find the correct handles is to search by brand option on the website. This will help narrow down your options, and then you can select the correct size.

A typical handle set comes with the handle unit with a pair of various length screws, drill guides and installation instructions. Smart versions, like the Igloohome Smart Mortise 2+ come with a mortice lock with a keypad. These are more complex devices and are best suited to professional installers or skilled DIYers. Some handle sets include an array of additional accessories, such as weather strips that can be used to improve the look of the door.