Tips For Replacing a Window Handle

It is simple to change your window handle from the comfort of your home. Follow these guidelines to ensure a smooth and beautiful finish.

Remove the screw covers from your uPVC handle to reveal the screws. Take a measurement of the spindle to be sure you are getting the right size replacement.

1. Determine the length of the Spindle.

When replacing a window handle, it's important to determine the dimensions of the spindle right. This is because it will determine how tight or loose the handle is, and whether it will lock correctly within the frame of the window. The spindle is a steel shaft that connects the handle to the lock inside the window frame. The spindle could be a standard industry 8mm cross-section or the older 9mm versions. Modern industry standards are 8mm but it wasn't always this way. It is essential to check the measurements when purchasing a new handle.

The easiest way to measure the spindle length is to take off the handle you have already installed and this can be done by turning it to the open position and then removing the two screws (which might be hidden behind plastic caps that have to be removed) which hold the handle. Once removed you can measure from the base of the handle to the end of the spindle. This will give you the measurement required to buy a replacement.

There are a lot of options to consider when selecting the right window handle from sleek chrome that blends into a contemporary home to traditional brass that looks stunning in restored Georgian rooms or even the more classic Tudor cottages with curled monkey tail locks! There are a lot of options, but the most important thing is to choose one that complements your home's decor.


Espag handles are usually fitted to uPVC windows and are always the same size with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, starting at 58mm up to 62mm. Cadenza window handles are a different size since they have an angled blade which operates a multi-point locking mechanism inside the window.

When selecting a window handle it is important to consider the hand you use to open your door. Inline espag window handles are not handed and can be utilized for left or right handed windows. Cranked window handles are hand-operated and can only be used on windows that open in only one direction.

2. Take the handle off

If the handle is damaged or just worn out the handle of a window that is shattered can be a real pain. The good news is, you can repair the uPVC handle by yourself. You'll need only the most basic hand tools as well as some time to complete this process.

First, you must open the window, and ensure that it is not locked. Then, take off the screws that hold the handle in place. After the screw caps are removed, you will be able remove the handle.

The handle itself is fixed to a spindle in the window frame. Depending on the kind, this is held in place either by a screw or pin. The most popular types of handles are inline Espagnolette handles and the cockspur handles. Both kinds of handles can be found on casement windows, including aluminium ones. They can be locked using keys to prevent the opening of the window from outside or you can lock them by turning the handle clockwise.

To take the handle off, you will need a flat-bladed screwdriver. Once this is released, the handle will fall off the spindle. When the handle is removed, you'll need to measure the length of the spindle and make sure that the new handle is compatible with this size.

Once you have determined the proper size of the handle, you can screw it into the correct position. You will need to make sure that the new handle is firmly fixed and is turning the correct way (clockwise for open and counterclockwise for closed). It is also crucial to check that it has not been installed upside down.

Finally, you should replace the screw cap caps. After you've done this, you can test the handle to confirm that it is working correctly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked one and back.

3. Remove the Screws

A uPVC window handle is an integral component of every home and is often the first item to show signs of wear and tear or damage. It can be caused by natural factors or through regular use and sometimes even malicious damage caused by opportunistic criminals who might seek to open a closed window and gain access to your home. A simple replacement can solve the problem and prevent it from repeating itself.

UPVC handles can be difficult to open if the locking mechanism isn't functioning correctly. It's often possible to solve the issue by replacing the multipoint locking mechanism rather than the entire handle. This can save you money.

After you've removed the old handle, you'll need to remove the screws that were that held it in place. They are usually located on the inside face of the base of the handle. You may need to use a screwdriver to accomplish this and it's essential that you don't over tighten, as this could cause the handle to loosen.

Repair My Windows And Doors 'll then have to find the fixing screws or pins that keep the new handle in the correct position. These are usually located on the inside of the base of the handle. You will need a screwdriver to take them off. Once they're removed you will have to replace the caps on screws in the event that you want to do so and test the new handle to confirm that it's working properly.

When you're ready to install the new handle, simply line up the spindle with the cutout in the window mechanism and screw it into the right position. Make sure that the handle is in the open position and that the screws are securely secured prior to replacing the screws' covers, in the event that you want to do so. Once this is complete you're done and are able to enjoy your new window handle. I hope this will enable you avoid the need for expensive replacement of your door and window in the future. If you'd like assistance regarding this or any other aspect of your uPVC windows do not hesitate to contact us.

4. Install the new handle

The procedure of replacing a damaged window handle or updating it is simple and can be completed within just a few steps. The most important thing is to identify the kind of handle, determine its spindle and know what tools you will need to complete the task. Always ensure safety when working with windows and tools. Be sure to follow the steps and ensure that you have the right handle for use.

The first step is to identify the screws holding your existing window handle in place. Then, remove these, whilst keeping a safe hold on the handle itself to stop it from crashing and result in injury. After the screws have been removed, they can be placed in a secure location to be replaced in the future.

After the handle that was used previously has been removed, you are now able to begin fitting the new one. The handle needs to be perfectly positioned for it to function properly and hold the window in its closed position. Then move the metal bar that is square on the handle into the hole for the window mechanism.

Now that the new handle is in place, the final thing to do is to replace the screw caps and test it to make sure it functions. If you aren't satisfied with the results or if your window does not open or close correctly, call our experts for help.

Most homes in the UK have uPVC windows and as they are, a lot of them will need to be replaced due to wear or breakage. Anyone with some DIY knowledge can carry out the process. The most important aspect in the success of the process is making sure you're using a replacement handle which matches your existing window in terms of size and design. Contact us if you are unsure about the type of handle that you need. They'll be able guide you through all the choices.