Conservatory Door Lock Repairs

Conservatory door locks are an essential component of the security of your home. When they begin to fail, it's crucial that you call an emergency locksmith.

Luckily, most repairs to the locks for conservatories are fairly simple and easy to complete. The most frequent issues are:. sagging hinges, floppy door handle mechanism, and locking issues.

Damaged or Faulty locks

Secure your conservatory doors correctly is a top priority. If you notice your lock is damaged or defective seek out an expert to have it repaired as soon as you can. This will help to stop any possible break-ins or damage to property.

If your lock isn't opening or closing as it should first thing to look into is whether or not there's a problem with the hinges. They may need tightening to prevent the door from sliding. If this doesn't solve the issue it could be because the latch or bolt is defective and must be replaced.

A common problem is when your key will not turn in the cylinder. This could be due to a variety reasons such as dust or dirt that has accumulated in the lock. If this is the problem, you can clear away any debris or apply lubricant in order to make the mechanism move without restriction.

You may also notice that your key isn't turning inside the cylinder due to it having become displaced. This is more common for older locks, which have been through a lot of wear. In richmond Conservatory Roof Repairs is recommended to leave the repairs to professionals. They can perform an in-depth analysis of the issue and make the necessary repairs.

It's important to note that in the event that your uPVC lock is broken and you need to replace the entire mechanism. This is a daunting task and should only by attempted by experts. To accomplish this, you will need to remove the handle, detach the spindles and handles, and then loosen the mechanism. You should then measure the main dimensions of the mechanism to ensure you buy an appropriate replacement that will fit.

Your lock may not open or close due a multipoint locking system that is faulty or a security bolt or hook that is jammed. This will likely require the expertise of a professional locksmith and will usually involve disassembling the whole lock.

Sagging Hinges

Many door sag issues are caused by loose hinge screws or the frame itself. If tightening screws does not solve the problem, you can add reinforcements to aid in keeping the hinges in place. Fill the gap between the frame and the hinge with pennies, wood veneer, or popsicle sticks. If you are unable to find a suitable substrate, you could try using longer screws because they'll be able grasp deeper into the studs and provide stronger support.

Once you've inserted your shims then screw the hinge back into position. Make sure to tighten the screws a few times at one time. Be careful not to tighten them too much and damage the hinges or frames. After that, you should test the door to determine if it's closing properly and latching correctly. You can add an additional hinge after you've solved the sagging issue. This will distribute the weight more evenly and avoid further problems.

If the sagging is due to an unaligned jamb You can use longer screws to draw the jamb tighter. To do this, take the screw that is on the lock-side of the hinge. Replace it with a longer one that extends into framing. Repeat the process with any screws remaining on the hinge.

The strike plate might be placed in an improper position. This can cause the door to hit the frame and cause scratches which make it difficult for the latch to catch. You can sand the edge of strike plate with an orbital sander or hand sander.

Floppy Door Handle Mechanism

Over time the screws securing the door handle mechanism may become loose and cause it to feel floppy. This is not only inconvenient but can be a security risk as it could indicate that the internal mechanisms aren't working properly to stop your home from being entered. A loose handle is difficult to lock, as you may need to apply pressure.

Luckily, this is usually an easy fix. Locate the screw that holds the barrel of the handle and tighten it. Alternately, you can try loosening the screws and test if the handle reorients itself to a horizontal orientation.

It is also possible to lubricate the springs in your uPVC handle. This is a simple job that can be done using small amounts of grease from your kitchen or WD40.

Once you have removed the door handle and taken it apart, you should be able to see whether there are loose or missing screws. You can tighten loose screws with a screwdriver or replace them if they are damaged or broken. Afterwards, you can clean the screw heads and use alcohol-soaked cloths to wipe away any oil residues. Then, you can apply a threadlocker to the screws to ensure that they stay in the correct position.

In certain situations, it could be necessary for the entire uPVC lock mechanism to be replaced. If this is the case, you should always use an approved handle set like a Sold Secure SS301 or 2* Kitemark. This will help to ensure that your conservatory stays as secure as possible, and will help prevent burglaries.

It is a good idea to get your locks checked regularly by a professional locksmith. This will help keep them in top condition and decrease the risk of damaged components forming. While you're at it, you should upgrade your locks and handles to a higher level of security. This will stop unauthorised entry and increase the safety of your family and yourself.

Locked Out


You may be locked out if the key turns and spins in the lock but the door doesn't unlock. Get a professional's help before you attempt to open the lock. They will be able to gain access to your door without damaging the lock or it, and will have replacements locks on hand. Sometimes, the issue is due to an inconsistency in the alignment of the door, which can be fixed easily with a few adjustments through hinges. Sometimes, it could be due to a malfunctioning lock, which requires replacement.

Do not try to open the door of your conservatory by force as this could cause damage to the lock and mechanism, causing you to be locked out!