Replacing Window Handle

Over time the window handle may get damaged due to the use and stress. This could result in the handle becoming loose or wobbly and making it difficult to open and close your window.

Replacing the handle on your window is a simple task that can be done in a matter of minutes. The key is to remove the screws that are holding the old handle and then find an alternative.

Identifying the Handle

The window handles you pick may seem like an insignificant aspect, but they could be a significant influence on the aesthetics of your windows. The most effective handles will improve the look of your home by enhancing your preferred style of design. On the other hand, a mismatched handle can be a glaring annoyance that disrupts the harmony of your living space.


It is crucial to determine the window handle you have before purchasing replacements. It is essential to identify the handle of your window prior to purchasing replacements. check out here will ensure the new handles will work with the uPVC windows you already have and they offer the desired functionality.

Window handle types vary from traditional sash lifts, to modern tilt-and-turn designs. The most popular types are:

Espag Window Handles

These handles are equipped with a mental spindle which is fixed to the back of the frame and controls the window mechanism. The handles are fixed in place to prevent them moving when they are used. This kind of window handle can be found in many modern homes.

Cockspur Window Handles

With intricate designs and antique finishes, cockspur handles can add charm to classic or traditional homes. They come in a wide variety of colors, so you can choose one that matches your decor.

Casement Window Handles

This kind of window handle is commonly used for casement and awning windows. Its simple crank operation allows the windows to open and close effortlessly. This handle is present in many American homes including modern farmhouses and suburban one-story houses.

To ensure that your new handle will fit the existing window, you should first remove the screws on the bottom of the handle and put them in a secure location. It is also important to take note of the length of the spindle as this will be the most important factor in determining the appropriate size handle for your windows. Once you've determined the dimensions and the type of handle you want, you can begin looking for an alternative. When buying the new handle, make sure that the spindle is the same size as the one you have previously. If you're not sure about the spindle's size it is recommended to buy the handle with an adjustable spindle.

Identifying the Length of the Spindle

It is crucial to determine the length of the spindle from the base when replacing the window handle. This will allow you to choose the appropriate replacement. The square peg at the back of the handle will usually be connected to the spindle by either a screw, or pin. Remove the old handle, then find the screw or pin, and make use of a screwdriver to remove it. Then, carefully remove the spindle and take note of the length of the metal bar that it connects to.

The size of the spindle will help you determine the type of handle that is installed on your uPVC windows. This is vital, since each handle has its own method of fitting into the uPVC frame. Older handles have a spur that extends and locks onto a wedge striker. These are known as Cockspur handles and must be matched when replacing them. The spindle is covered with sleeves on handles that are newer.

Identifying the type of handle that is used in your uPVC windows will allow you to ensure that the replacement is an exact match. In addition to the spindle length and width, you should also take into consideration whether the handle is handed or not. Handles that open anti-clockwise are right-handed, whereas those that open clockwise are left-handed.

Another important aspect to take into consideration when identifying the type of uPVC window handle is the step height. This is the length of the square metal bar that extends from the base of the handle to the back of the window frame. This is the height of the step on the handle. Request a new handle that has the same height to make sure it is compatible with the window frame.

The procedure of replacing a uPVC window handle is fairly easy, particularly when you are able to identify the correct part number. After you have removed the old handle and replacing the visible screws with screw covers. Examine the handle's base to see if there are any screws hidden. With pliers or a screwdriver remove them and remove the handle from the window frame.

Identifying the Screws

Window handles might not get much attention, but they're an essential part of your windows both in terms of function and aesthetics. It's not surprising that window handles may become damaged and need replacement. It's good to know that changing a window handle is relatively easy and can be accomplished in just a few steps. It's important to know what kind of handle you have before you replace it. Not all uPVC handles have the same size, so you have be sure that the new handle fits in the existing holes and that the rod (spindle) is the right length.

Once you've identified the type of handle you have then you can remove it and remove the old handle. To accomplish this, you'll need an appropriate screwdriver and a bit of patience. The handle is held to its base by pin or screw which can be removed by unscrewing it from the frame's outside. Once the handle is removed, you can begin taking off the fixing pins or screws that fix it to the frame. These can be found in the holes located around the handle's bottom. Once these have been removed the handle can then be removed and the spindle pushed through from behind to secure it in the right position.

After you have removed the handle, you will need to determine the length of spindle. Place something in the middle hole. Then, examine the label on the new handle to check that it's the right length for the windows you have. You can also put something in the hole to gauge its depth and decide on the size spindle to purchase.

Once you've determined the length of your spindle, you're ready to install the new handle. Simply line up the fixing holes with those on your window frame, then put in the pins or screws to tighten them. Be careful not to over-tighten these screws as this may cause the handle to break or warp. Once you've put in your new handle, be sure that it's secure, and then test it by opening and closing the window a few times.

Identifying the window frame

It can be quite frustrating when your uPVC handle falls off and you feel like the window is inoperable. However, it's more likely that the handle simply lost its grip and can be quickly fixed by following taking a few easy steps. Recognizing the type of handle you have is essential since there are a variety of kinds of handles for double glazing windows and some are exclusive to certain manufacturers. If you know the handle, it will be easier to locate a replacement handle.

In the majority of instances the handle is held in position by screws located under covers either the side of it. These covers can be removed using a screwdriver to expose the screw holes. It is important that you keep these screw covers in a secure location as they will be required when installing the new handle.

After taking off the screws, you can remove the handle. After the handle is removed you will be able to see the spindle that runs through it before entering the lock mechanism inside the window frame. It is crucial to ensure that the spindle is of the same length as the handle originally when purchasing the replacement. You can do this by looking at the handle you had previously or by dropping something into the hole in the spindle to measure the depth. Once you have the correct size spindle, you can attach the handle to the window and make sure it is secure with the help of a pin or screw.

When a window handle fails, it's usually due to the lack of maintenance such as cleaning or lubrication. This can result in the handle deteriorating over time and leading to it breaking prematurely. If the handle is not properly aligned or fixed to the window frame, it can be subjected extra stress. The handle can then be exposed to pressure or stress that can cause it to break. All of this is preventable by regular maintenance and ensuring that the handle is correctly fitted.