UPVC Replacement Door Handles

As time passes the handles on your doors will wear down and will require replacement. In this case, it is essential that the new handles conform to the dimensions of the handle that was previously used.

The top screw's location, the lever and the keyhole sizes are the three measurements you need to check. Use the size guide to assistance with this.

Inline Lever/Lever

A lever handle or lever is a modern-day door handle that is designed to fit new or replacement doors. This kind of handle is available in various styles and finishes. This handle is available from a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite handles are made from robust materials, and are ideal for multi-point lock doors that require a strong design. The handles are inline and use the same spindle and screws to secure them. They can be easily mounted on any uPVC/Composite doors.

The spring lever design allows the handle to be set and angled for comfortable operation and is suitable for all users. The handle has been tested for endurance up to 200,000 cycles. This helps to ensure that the finish is of high quality and performance is maintained over time. The lever that is sprung can be shortened to fit the widest range of locks. This is particularly useful for doors with narrower openings where the cylinder is situated further back from the door. door handle repairs shortened lever is also a good choice for doors where the latch could be opened by a thumb turn located on the inside.

Lever Pad

A Lever Pad upvc door handle operates differently to the lever type handles that are found on the majority of doors. These handle types can either operate from a single spindle (inline) or independently from both sides using two inline or offset spindles (pad). They are typically employed on UPVC doors with double glazing. They are available in a range of finishes & variations.

The handles are available in various finishes, including White chrome and Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high level of durability and performance for its intended use.

All UPVC handle lever pads come with a spindle, screws and can be mounted on the uPVC door. The backplate fixing centers of 211mm permit a bigger handle, which can often be a benefit in replacing a defective or worn multi point door lock mechanism. These levers for handles are also spring-loaded, which solves the issue of handles that slide out of their horizontal position when not in use.

It is important to match up the PZ dimensions for both the multipoint lock and the uPVC doors when choosing the replacement UPVC spindle and handle. This measurement is also called 'handle centre' or cylinder centres'. It is important to match the correct handles.

After you have identified the proper PZ size and the correct PZ size, you must ensure that the push and lever pads are shaped to match the American with Disabilities Act compliant handles that you need for your door. They are usually a square or round design with an internal lever as well as an external push pad.

The majority of UPVC lever pads that we sell are sprung, meaning that they will return to their horizontal position after not in use, instead of hanging out and possibly securing in the frame. This keeps draughts out of the property. The majority of UPVC lever pad style handles are available in left and right handed versions, allowing them to be placed on either side of the doors.

Euro Cylinder

Cylinder locks can be found on uPVC and other kinds of doors. The cylinder lock is operated with a key that unlocks the cylinder's case. The case is then able to reveal pins that can be aligned with those inside the lock, allowing them to rotate the revolving camera, opening the door. Euro Cylinders are available with up to six pins. Internal and external doors require different levels of security.

Selecting the right cylinder for your needs is vitally important; this is contingent on the way your doors and handle are utilized. For example, external doors require a higher security cylinder, while internal doors can be secured with an ordinary cylinder. Some cylinders have extra features that increase security, like anti-drill or anti bump properties.

To make sure that the euro cylinder is the correct size for your door, it must be measured correctly. The cylinder must be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn, in the event that one is present. It is recommended to do this while the lock is in place however, if this is not feasible, you can take it off and remove it to take measurements. A cylinder that protrudes beyond the handle and escutcheon could be susceptible to attacks like snapping locks, so it is crucial to make sure it's not too long.

Most modern cylinders are made with anti-drill and bump resistance features built into their design. They are designed to decrease attack chances by forcing the cylinders to turn in a different direction. This can to deflect attacks and protect your door.


Certain cylinders are constructed to withstand snapping. This is a common occurrence on cylinders. A specially designed tool is used to break the break line of the lock, and then the front of the cylinder is snapped off. This is a much faster and easier way to gain access than the use of a multipoint locking system. It also leaves less evidence of the burglary which could make it difficult to prove insurance claims.

Spring Cassette

The spring cassette is situated inside the base plate of your door handle. It provides a sprung solution to help return the multipoint lock handles to their normal position after use. There was a time when handles did not have a spring integrated into them, and without it they tend to droop or drop once the locking mechanism is disengaged. This simple component is the most effective way to fix this problem. It also helps prevent your door from getting stuck in the open or closed position as they aren't easy to close manually.

These spring cassettes were designed to be used with a spring multipoint locks. They are not compatible with handles that are not sprung and you'll need to cut a hole into your backplate in order for them to fit. (Please look at the image for a technical diagram). These cassettes can be used as a replacement for damaged or missing cassettes in the backplate of uPVC door handles. They are supplied in a single unit. They have a square-cut out that is able to accommodate an 8mm shaft.

These spring cassettes provide an excellent value solution to the problem of door handles that have become sagging. They are simple to install and will extend the life span of your uPVC doors. Contact us for more information about our range of uPVC accessories and spares. We are here to help and happy to provide professional advice.