How to Replace a Mazda Key

Mazda is a brand known for its innovative and technologically advanced technology. Some of these systems improve the safety and performance of vehicles, while others make driving around East Stroudsburg Easton and Brodheadsville easier.


The key fob for instance is a great illustration of this. It lets you lock the door, unlock it, and even start your Mazda by pushing a button. However, its battery needs to be replaced every now and then.

Lost Keys

Keys that are lost or stolen can cause a lot of trouble. It is fairly easy to replace the Mazda Key for older models by using regular keys made of metal. However, newer cars require computer chips that are programmable that are only made by a locksmith or dealer.

To begin, you'll require the VIN for your car. It's usually located on the driver's side of the dashboard or on your insurance certificate, or in the vehicle's documentation. Note this information down to give to the locksmith or the dealership.

You will also need a spare working key. Put the key in the slot and set the ignition to ON. After about five seconds, you can remove the key and turn the ignition off. Repeat the process with the second working key. Once both keys are in the computer chip in your car is paired to the new key.

If you have lost keys to your car and don't have an extra set, you'll need to tow the vehicle to a dealer. Then, you'll need to show proof of ownership, and pay for the replacement key. You may have to wait for a few days while the dealer orders and pairs a replacement key to your vehicle. You can save money and time by having a locksmith replace your key rather than going to the dealer.

Ignition Cylinder Replacement

The ignition cylinder in your Mazda is the primary component that makes it possible to start your car by using the key. If you're having difficulty turning it on or you're unable to insert the key into the switch, your ignition cylinder may need to be replaced.

Ignition cylinders fail more often than the keys that last longer. There is no set maintenance routine for them, however you can help them to last by keeping your key clear and avoid excessive jiggling or shaking of the key.

To replace the ignition coil, you must remove any trim or covers that are blocking the way. Based on the model you have it may mean removing the steering wheel cover or removing the wiper as well as accessory switches. Then make use of a screwdriver, or socket wrench to press a release tab on the cylinder. The cylinder is released from the switch and allows it to slide out of the housing.

When the cylinder is removed then replace it by connecting it to the wires, tightening two screws on top, and replacing the cover of the switch. Reconnect the battery and test the key insertion/removal function of the new cylinder. Do this 3 to 5 times, and then reconnect the battery and try to start the vehicle to check everything is functioning correctly.

Remote Control Replacement

If your Mazda key remote is not working, you will require an expert. This isn't as common as a problem with the ignition cylinder, however, it could leave you in a bind. A locksmith can fix your car remote, and also handle all the programming that comes with it.

You will need to tell an locksmith the year and the model of your Mazda vehicle to get them to do this. This will allow them to collect the proper equipment and know that they'll require any additional key programming for your particular model of Mazda.

It could be that the battery in your key fob is low. In this case the best thing you can try is to reset your receiver. This can usually restore the functionality. If this fails, you must replace the batteries. To accomplish this, remove the key made of metal, and then use a tape-wrapped flathead screwdriver to pry open the case on one side, then on the other. After you've done this, insert a battery into the keyfob. Make sure it's a compatible battery and then close the case. The Mazda's RF unit needs to be reset to recognize the key.

Transponder Chip Replacement

If you have a Mazda key fob or smart key, chances are that your car has a transponder in it. This tiny piece of tech is essentially a mini motherboard that, when inserted into the ignition, sends an indication to the car's immobilizer system to let it know that the key is the right one for the vehicle you have.

They are excellent for security because they stop others from opening your car. They accomplish this by ensuring that only you can start the car. This is why it is important to be vigilant to make sure that the key you have be stolen or lost.

Fortunately, transponder chips can be replaced by a professional locksmith. To do mazda key , you'll have to take off the cover from your key fob. It's usually thin plastic piece that can be removed using the screwdriver. Then, you'll need to remove the chip. It should look like a tiny black square or transparent tube. Once you've completed that, just place the chip on a piece of tape and connect it to the ignition lock.

A professional locksmith should be able to accomplish this in no time at all, and they'll be able to help you get your car back on the road as quickly as possible. If you're having issues with your Mazda key, call a reputable mobile locksmith right immediately.