<h1 style="clear:both" id="content-section-0">6795-C - 2 Flavor Frozen Beverage Machine Floor Model in Waterbury Connecticut</h1>

Drag to rearrange sections
Rich Text Content


A little adjust thickness setting as necessary to adjust product suppleness. 3 - 5 Quick Operation Refresh Device Parts Dispensing Door (1 ), with Beater Poles (2) Dispensing-Door Gaskets (2) Beater Guides (2) Side Attract Valves (2 ), with O-Rings (4) Center Draw Valve (1 ), with H-Ring (1) Hand Screws (2 Short, 2 Long) Draw Deals With (3 ), with Adjusting Screws (3) Star Caps (3) Retention Pin (1 ), with Nut (1) Prime Plugs (2 ), with O-Rings (4) Beaters (2) Scraper Blade Clips (4) Scraper Blades (4) Beater Footwear (2 Left and also 2 Right) Drive Shafts (2) Drive Shaft Gaskets (2) Receptacle Covers (2) Air Tubes (2) as well as Caps (2) Hopper Agitators (2) (if included) O-Ring Elimination Tool (1) Brush Set (1) Inner Drip Tray (1) Front Drip Tray (1 ), with Dash Guard (1) Air Pump Assembly (if consisted of) 4 6 Installment Requirements Electric demands In the United States, it is called for that this device be installed in conformity with the National Electric Code (NEC), ANSI/NFPA to practically secure persons as well as residential or commercial property from hazards arising from making use of electricity.


Refrigerant needs Spaceman USA calls for that just the specified refrigerant be made use of in your equipment. Alternate refrigerants may cause damages to the air conditioning system and/or stop the equipment from running at ideal performance.


 Frozen yogurt machine, Locker storage, Soft  serve machine ZeroDown


Key compressor: 1x 6500 BTU, R404A Machine positioning demands Care: The equipment needs to be put on a level surface area away from wall surfaces and also other things. Failure to conform will harm the equipment and also refrigeration parts and will void all service warranties. CAUTION: The maker is developed to run in normal ambient temperature levels of 60 to 75 o F.


Place on area flat, level, degree solid surface strong surface area the machine dimensionsDevice


Spaceman USA LLC - PublicGovCO: Public Government Data ... in Daly City California


2 or even more workers need to eliminate the equipment from its product packaging and place it in its final operating area. 2. Eliminate plastic wrapping around equipment.


Cut stabilizing straps, being mindful not to scratch or damage the maker panels. Prepare the area where the machine will be put, eliminate packaging cardboard from underneath machine, and area ramp wedges near front casters. Unlock front casters, as well as roll device down the wedges off the pallet.


2. Check for delivery damages Evaluate the equipment for any delivery damage. Unpack as well as examine parts Refer to the in-depth parts representations on the back web pages if necessary.


Eliminate all packaged parts and also accessories from your device. Hopper Lids (2) Front Drip Tray + Sprinkle Shield Dispensing Handles (3) Retention Pin with Nut Startup Package Brush Kits (1 Huge and also 1 Small) Machine Manual 3.


Clean as well as correctly lubricate equipment parts prior to device procedure. After unpacking and also inspecting the parts, you are ready to disassemble the machine as well as prepare for the initial operation.


Home - Boulder Organic Ice Cream in Amarillo Texas


The maker comes outfitted with a brush set particularly made to effectively as well as appropriately tidy the device. Tune-Up Kit WARNING: If this is the initial time running the maker, you MUST clean and sanitize ALL parts prior to running the device. VITAL: Cleaning and also disinfecting routines are governed by state or local regulative companies and also MUST be adhered to accordingly.


CAUTIONS: Do NOT run the machine without correctly lubricating called for components. Do NOT tidy the machine with abrasive or harmful chemicals and cleaners. Doing so might create damages to the stainless-steel product. ONLY use Spaceman-USA-included cleaning brushes and also lubrication. NEVER usage metal objects to tidy or operate the equipment.


ALWAYS prime equipment prior to operating. ALWAYS examine components for excess wear as well as damages. Drain Item NOTES: To quicken draining, turn off machine 30 mins prior to soften product.


FSX, the Food Service Exchange, is the commercial food service industry's go-to source for purchasing overstock, discontinued, and scratch-and-dent equipment and supplies, and you will be shocked at how good our prices are (an average discount of over 50% of today's market price).

The FSX online marketplace provides restaurants, caterers, schools and other food service facilities with access to a wide assortment of products. The exchange allows for direct sales between pre-approved sellers and buyers, ensuring a seamless, reliable, and fast timely transaction process. Whether it is a model from a previous year or an item with a slight imperfection, buyers can purchase anything they need from our extensive pool of pre-selected, certified top equipment manufacturers and dealers. With Food Service Exchange, customers can expect premium equipment and supplies, amazing prices, timely shipping, and consistent satisfaction. Find out more information today about FSX Food Service Commercial Kitchen Equipment and Restaurant Supplies at 20 - 50% off market prices, with a minimum 90-day warranty. Plus, 5-star customer service reviews, unmatched 90-day warranty, and always free shipping!

CAUTION: Never utilize warm water when rinsing the maker to stop damage. 1. Get rid of receptacle lids, air tubes, and also (if present) agitators; if machine has air pumps, do not disconnect air tubes 2.


Press RESET switches to stop laundry cycle 7. Remove item as well as dispose or refrigerate it 8. Load each receptacle with one gallon of great water 9. Usage amazing water as well as the big brush to scrub the sides as well as bottom of the receptacles; be VERY mindful not to damage the low-mix sensor in the receptacles 10.


Jeff Resnick - Spaceman USA - Email Chief Executive Officer ... in Ontario California


OPEN draw manages to drain water as well as staying product; CLOSE when finished 13. Use the small brush kit to tidy inside the feed tube at the base of the hoppers; if equipment has air pumps, this action is not necessary 14.


Press RESET buttons b. OPEN draw deals with (DOWN) for 10 to 15 seconds to alleviate stress in cylinders a b 8 10 Cleansing: 2. Take Apart NOTE: Prepare dishwashing area before disassembly, use pail to briefly store large removed parts and also a tiny container for O-rings, and also have a towel close by to record excess water.


2. If maker has air pumps, dismantle them 1. Transform power buttons OFF a. OPEN draw takes care of to verify absolutely no pressure in cylinders; twist air tube connectors to unlock and separate air tubes 1 b. Take air tubes apart completely; each air tube has O-rings (3 ), adapters (2 ), and also check valve (1) c.


Main compressor: 1x 6500 BTU, R404A Device positioning needs Care: The equipment should be placed on a degree surface away from wall surfaces and also various other objects. CAUTION: The equipment is created to operate in typical ambient temperatures of 60 to 75 o F.


Place on a flat, level, degree solid surface strong to the machine dimensionsMaker Prepare the location where the device will certainly be placed, eliminate packing cardboard from beneath equipment, and location ramp wedges near front casters. Tidy and appropriately lubricate equipment parts prior to equipment operation. Tune-Up Set WARNING: If this is the initial time running the device, you MUST tidy as well as disinfect ALL components prior to running the maker.


Astronaut Ice Cream: Freeze Dried Ice Cream & Fruit by ... in Billings Montana


Remove dispensing door 3b a. Get rid of dispensing-door hand-screws (4) b. Remove giving door assembly from cyndrical tubes 9 11 Cleaning: 2. Dismantle 4. Disassemble giving door a. Remove beater overviews (2) from door assembly; get rid of gaskets (2) from door setting up making use of O-ring removal device 4a 4b 4b b. Remove prime plugs (2) from door assembly; remove O-rings (4) from prime plugs using O-ring elimination tool 4c 4c 4d c.


Get rid of draw handles (3 ), lowering first to appear draw valves, after that taking out e. Remove draw valves (3 ), twisting while eliminating to prevent damage 4e 4f 4g f. Remove O-rings (4) and also H-ring (1) from draw shutoffs utilizing O-ring elimination device g. Rotate star caps (3) to make sure that tabs are accessible; snap off star caps 5.


Eliminate beater settings up (2) from cyndrical tubes 5a 5b 5b b. Remove scraper blades (4) from beater assemblies; different scrape blade clips (4) from scrape blades c. Manage beater shoes (4) d. Get rid of drive shafts (2) from inside cylinders using a completely dry towel; separate gaskets (2) from drive shafts 5c 5d 5d Keep In Mind: If you experience assembly trouble with drive shafts, Spaceman provides a specific elimination device for purchase.


Remove internal drip tray as well as front drip tray + sprinkle guard 12 Cleansing: 3. Confirm power buttons are in the OFF position 2. Use the big brush as well as trendy water to extensively clean inside the cyndrical tubes; be sure to scrub the back of the cylinders and also confirm the cylinders are complimentary of ALL item 3.


Carefully tidy and also clean down the exterior of the maker 5. Very carefully and extensively clean all components removed from the machine using provided brushes, sponges, and tidy towels; if maker has air pumps, make certain to include all air pump components in cleaning 6. When cleansing the giving door setting up, clean the priming ports with a small brush 7.


M o d e l 6455 in Fort Collins Colorado


Confirm all parts are tidy as well as free of all food product prior to re-assembling maker 13 12 14 Cleansing: 4. If parts don t appear to fit, get rid of all components as well as repeat setting up. Verify power switches are in the OFF placement 2.


Area drive shaft gaskets (2) on drive shafts (2) b. Seal gasket open spaces with Spaceman lubricant, expanding onto drive shafts as well as preventing the leading square parts c. Insert drive shafts right into rear shell bearings at the rear of the cyndrical tubes, and turn them till the key involves securely into the socket (when inserted correctly, the drive shaft will certainly no much longer transform 360) 3.


Attach beater footwear (4) onto beaters (2 ); when correctly positioned, neither shoe overhangs beater side 3b 3a 3c 3d b. Install scrape blade clips (4) onto scrape blades (4) c. Fit scraper blades onto beaters (2) d. that resource Insert beater assemblies into cyndrical tubes, making certain beater footwear stay in location; turn assemblies till they involve the drive shaft secrets and also no much longer turn Install giving door 4a 4b 4c 4d 4e 4f 4g 4h 4i a.


About - SpacemanAstronaut McCandless, first to fly untethered, dies at 80


Spaceman USAA Fresh Take on a Classic Brand — Thirst Colorado


Push prime plugs right into holes on top of giving door c. Insert attract shutoffs right into giving door, O-rings-first; middle draw shutoff enters the center and also ports deal with outside d. Establish draw manages (3) into slots on dispensing door, with adjustment screws facing down e. Slide retention pin with draw takes care of; safe and secure with nut f.


Fit gaskets (2) into grooves on back of door, level side out; slide beater overviews (2) over beater rods (2 ), with flanged sides versus the door h. Insert giving door assembly right into cyndrical tubes, beater rods initially, pushing manages all the means up as you insert 13 i. Secure door assembly in a cross-pattern using handscrews (4 ), with the long hand-screws (2) on top 15 Cleaning: 4.


Spaceman USA - CFESA in Pomona California


If device has air pumps, set up as well as install them 5a 5b 5b 5c 5d 5d a. Area O-rings on back shells, finishing with Spaceman lube; set up equipments into shells (they only fit one instructions) b. Attach covers as well as coverings, ensuring they fit flush; protect with hand-screws c. Area O-rings on suction tubes; lightly oil O-ring locations d.


Insert suction tubes into pumps; rotate to secure, as well as turn to preferred overrun setting 5e 5f 5g 5g 5h 5h f. Coat air pump drive shafts with Spaceman lubricating substance g. Set up air pumps onto maker: insert at an angle while pressing air pump in, slightly rotate back and forth up until the gear involves the air pump drive shaft push in and also rotate counter-clockwise to lock in area h.


If device will certainly go unused, install air tubes right into receptacle, yet do not attach to air pumps; or else, established air tubes apart till after equipment has actually been keyed 6a 6a 6. Mount hopper covers, agitators, and also drip trays a. Coat inside of agitators (if present) with Spaceman lubricant and set up with arrow punctuating b.


Home - SpacemanFeatured Product Lines - Spaceman


If device will be left extra, set up air tubes and also place hopper covers on top; or else, established air tubes apart until after maker has been topped 14 16 Sanitization Sanitiza- IMPORTANT: After sanitizing the machine, DO NOT rinse or touch areas that have been sanitized. Product has to be added right away.

rich_text    
Drag to rearrange sections
Rich Text Content
rich_text    

Page Comments

No Comments

Add a New Comment:

You must be logged in to make comments on this page.