P.S. Free 2025 HP HPE6-A85 dumps are available on Google Drive shared by Lead2PassExam: https://drive.google.com/open?id=1v4HJa2AiExkLM0246Fuay1QTbHhXp8Wf

There is no doubt that advanced technologies are playing an important role in boosting the growth of HP companies. This is the reason why the employees have now started upgrading their skillset with the Aruba Campus Access Associate Exam (HPE6-A85) certification exam because they want to work with those latest applications and save their jobs. They attempt the HPE6-A85 exam to validate their skills and try to get their dream job.

HP HPE6-A85 Exam is an important certification exam for IT professionals who are involved in designing, deploying, and managing Aruba wireless networks. A certification in HPE6-A85 demonstrates the candidate’s expertise in Aruba wireless networks and validates their knowledge and skills in this field. A certification in HPE6-A85 is highly valued in the IT industry and can lead to better career opportunities for IT professionals.

HP HPE6-A85 Aruba Campus Access Associate exam is an entry-level certification exam designed to assess the knowledge and skills of the candidates in developing and deploying Aruba wireless networks. It covers various topics, including network fundamentals, wireless LAN fundamentals, security basics, and wireless LAN design. It is an excellent certification for individuals who want to launch a career in the networking industry and are interested in wireless network technologies.

The Aruba Campus Access Associate certification is suitable for IT professionals who are responsible for deploying and managing wireless and wired networks in small to medium-sized organizations. Aruba Campus Access Associate Exam certification validates the skills and knowledge required to configure and maintain Aruba wireless and wired networks, troubleshoot network issues, and ensure network security.

>> HPE6-A85 Pdf Demo Download <<

Test HPE6-A85 Simulator Free - Latest HPE6-A85 Exam Cram

Our HPE6-A85 study materials are full of useful knowledge, which can meet your requirements of improvement. Also, it just takes about twenty to thirty hours for you to do exercises of the HPE6-A85 study guide. The learning time is short but efficient. You will elevate your ability in the shortest time with the help of our HPE6-A85 Preparation questions. At the same time, you will be bound to pass the exam and achieve the shining HPE6-A85 certification which will help you get a better career.

HP Aruba Campus Access Associate Exam Sample Questions (Q19-Q24):

NEW QUESTION # 19
You have been asked to onboard a new Aruba 6300M in a customer deployment You are working remotely rather than on-site You have a colleague installing the switch The colleague has provided you with a remote console session to configure the edge switch You have been asked to configure a link aggregation going back to the cores using interfaces 1/1/51 and 1/1/52 The Senior Engineer of the project has asked you to configure the switch and 1Q uplink with these guidelines
1. Add VLAN 20 to the local VLAN database with name Mgmt
2. Add L3 SVl on VLAN 20 for Management using address 10 in the 10.1.1 0/24 subnet 3. Add LAG 1 using LACP mode active for the uplink
4 use vlan 20 as the native vlan on the LAG 5. Make sure the interfaces are all ON.
Which configuration script will achieve the task?

A. Edge1# conf t vlan 20 name Mgmt interface vlan 20 ip address 10.1.1.10/24 no shut interface lag 1 shut vlan access 20 lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut
B. Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1.1 10/24 no shut interface 1/1/51.1/1/52 shut vlan trunk native 20 vlan trunk allowed all lag 1 lacp mode active interface 1/1/51.1/1/52 no shut
C. Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1 1 10/24 no shut interface lag 1 shut vlan trunk native 20 vlan trunk allowed all lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut interface 1/1/51.1/1/52 no shut
D. conf t vlan 20 name Mgmt ip address 10 1 1.10/24 no shut interface lag 1 shut vlan trunk native 1 vlan trunk allowed all lacp mode active int 1/1/51.1/1/52 shut no routing interface lag 1 no shut interface 1/1/51.1/1/52 no shut

Answer: C

Explanation:
This configuration script will achieve the task as it follows the guidelines given by the Senior Engineer. It creates VLAN 20 with name Mgmt, adds L3 SVI on VLAN 20 with IP address 10.1.1.10/24, creates LAG 1 with LACP mode active for the uplink, uses VLAN 20 as the native VLAN on the LAG, and ensures that the interfaces are all ON. Reference: https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6790/GUID-8F0E7E8B-0F4B-4A3C-AE7F-0F1B5A7F9C5D.html Edge1# conf t vlan 20 name Mgmt interface vlan 20 ip address 10.1.1.10/24 no shut interface lag 1 no shut vlan trunk native 20 vlan trunk allowed all lacp mode active interface 1/1/51 no shut lag 1 interface 1/1/52 no shut lag 1 exit This script correctly creates VLAN 20 with the name 'Mgmt', adds an L3 SVI for management using the specified IP address, and configures LACP for link aggregation (LAG 1) using the active mode. It also sets VLAN 20 as the native VLAN on the LAG and ensures all interfaces are enabled ('no shut' is the command to bring up the interface if it has been administratively shut down).

NEW QUESTION # 20
Which commands are used to set a default route to 10.4.5.1 on an Aruba CX switch when ln-band management using an SVl is being used?

A. ip route 0 0 0.070 10.4 5.1 vrf mgmt
B. default-gateway 10.4.5.1
C. iP default-gateway 10.4.5.1
D. ip route 0.0 0 0/0 10.4.5.1

Answer: D

Explanation:
The command that is used to set a default route to 10.4.5.1 on an Aruba CX switch when in-band management using an SVI is being used is ip route 0.0 0 0/0 10.4.5.1. This command specifies the destination network address (0.0 0 0) and prefix length (/0) and the next-hop address (10.4.5.1) for reaching any network that is not directly connected to the switch. The default route applies to the default VRF Virtual Routing and Forwarding. VRF is a technology that allows multiple instances of a routing table to co-exist within the same router at the same time. VRFs are typically used to segment network traffic for security, privacy, or administrative purposes., which is used for in-band management traffic that goes through an SVI Switch Virtual Interface. SVI is a virtual interface on a switch that allows the switch to route packets between different VLANs on the same switch or different switches that are connected by a trunk link. An SVI is associated with a VLAN and has an IP address and subnet mask assigned to it12.
References:
1 https://www.arubanetworks.com/techdocs/AOS-CX/10_08/HTML/ip_route_4100i-6000-6100-
6200/Content/Ch
2 https://www.arubanetworks.com/techdocs/AOS-CX/10_08/HTML/ip_route_4100i-6000-6100-
6200/Content/Ch

NEW QUESTION # 21
What can be done to dynamically set the PoE Priority on a switch port when deploying IP cameras APs. and other PoE devices?

A. Configure PoE power management to Dynamic Mode
B. Enable Quick PoE on the switch modules
C. Enable profiling for device provisioning
D. Configure PoE power management to Class-based Mode

Answer: C

Explanation:
Profiling is a feature that allows Aruba switches to automatically identify and classify devices connected to them based on various attributes such as MAC address, DHCP options, LLDP information, etc. Profiling can be used to dynamically set the PoE priority on a switch port based on the device type and power requirements. For example, an IP camera may have a higher PoE priority than a printer or a PC. Profiling can also be used to apply other configuration settings such as VLANs, ACLs, QoS, etc. based on the device profile. Reference: https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/1-overview/profiling.htm

NEW QUESTION # 22
You have physical access to an Aruba CX-Switch with unknown/lost credentials. What are the possible steps to rebuild the credentials? (Select two.)

A. Call Aruba support for a one-time password.
B. Use boot profile 0.
C. Press and hold the clear button. Then, power-cycle the switch.
D. Connect the switch via the console. Then, power cycle the switch.
E. Press and hold the clear button. Then, press the reset button for 2 seconds and release both buttons.

Answer: B,C

Explanation:
To regain access to an Aruba CX switch when credentials are unknown or lost, one can press and hold the clear button, then power cycle the switch to reset the password. Additionally, using the boot profile 0 at the boot loader menu can be used to bypass the current startup configuration, which may include the unknown credentials.

NEW QUESTION # 23
You are in a meeting with a customer where you are asked to explain the network redundancy feature Multiple Spanning Tree (MSTP). What is the correct statement for this feature?

A. MSTP configuration ID revision by default as switch serial number
B. MSTP configuration ID name by default using switch IMC address
C. MSTP configuration ID name by default using switch serial number
D. MSTP configuration ID revision by default as current MSTP root priority

Answer: B

Explanation:
MSTP Multiple Spanning Tree Protocol. MSTP is an IEEE standard protocol for preventing loops in a network with multiple VLANs. MSTP allows multiple VLANs to be mapped to a reduced number of spanning-tree instances. configuration ID consists of two parameters: name and revision. The name is a 32- byte ASCII string that identifies the MSTP region, which is a group of switches that share the same configuration ID and VLAN-to-instance mapping. The revision is a 16-bit number that indicates the version of the configuration ID. By default, the MSTP configuration ID name is set to the switch IMC address, which is a unique identifier derived from the MAC address Media Access Control address. MAC address is a unique identifier assigned to a network interface controller (NIC) for use as a network address in communications within a network segment. of the switch.References:https://www.arubanetworks.com/techdocs
/ArubaOS_86_Web_Help/Content/arubaos-solutions/mstp/mstp.htm

NEW QUESTION # 24
......

The purchase process of our HPE6-A85 question torrent is very convenient for all people. In order to meet the needs of all customers, our company is willing to provide all customers with the convenient purchase way. If you buy our HPE6-A85 study tool successfully, you will have the right to download our HPE6-A85 Exam Torrent in several minutes, and then you just need to click on the link and log on to your website’s forum, you can start to learn our HPE6-A85 question torrent. At the same time, we believe that the convenient purchase process will help you save much time.

Test HPE6-A85 Simulator Free: https://www.lead2passexam.com/HP/valid-HPE6-A85-exam-dumps.html

P.S. Free 2025 HP HPE6-A85 dumps are available on Google Drive shared by Lead2PassExam: https://drive.google.com/open?id=1v4HJa2AiExkLM0246Fuay1QTbHhXp8Wf